NSN CC1707

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

unable to decode current rating in amps, open enclosure feature, unable to decode connection type and voltage rating in volts, no load current rating method, continuous duty cycle.

NSN 6105-00-248-9112 Datasheet

(NSN) National Stock Number

6105-00-248-9112

(FSG) Federal Supply Group

61 - Electric Wire, and Power and Distribution Equipment

(FSC) Federal Supply Classification

6105 - Electrical Motors

(NIIN) National Item Identification Number

00-248-9112

Requires Demilitarization

Yes

(INC) Item Name Code

16350

Date

Wed, Jun 13, 1973

Connection Type And Voltage Rating In Volts

unable to decode

Current Rating In Amps

unable to decode

Current Rating Method

no load

Duty Cycle

continuous

Enclosure Feature

open

Length Of Shaft From Housing

unable to decode

Mounting Facility Circle Diameter

0.676 inches

Mounting Facility Type And Quantity

2 threaded hole(s)

Mounting Method

face

Overall Height

1.238 inches

Overall Length

2.594 inches

Overall Width

1.188 inches

Shaft End Characteristic

unable to decode

Shaft Diameter

Torque Rating And Type

5.5 inch-ounces stalled

Winding Type

permanent magnet

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0016350

Cross Reference

CAGE Codes

25140

Globe Motors, Inc. Dba Allient Dayton

U.s./canadian manufacturers

40998

Mitchell Camera Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

Q - 70.0

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34760

Water Commodity

590 - Generators and parts, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

062120

Questions & Answers

1. What is the FSCG of the NSN 6105-00-248-9112?

   The FSCG of the NSN 6105-00-248-9112 is 6105

2. Does NSN 6105-00-248-9112 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6105-00-248-9112 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6105-00-248-9112 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 6105-00-248-9112 was assigned to the Federal Catalog?

   It was assigned 53 years ago, on Wed, Jun 13, 1973