NSN CC35RH151J

A specific electrical element or set of electrical elements that are connected together to form a fixed arrangement and used as a substitute load for terminating an electrical circuit. A dummy load contains all the essential electrical characteristics necessary to terminate the circuit but does not function in the same manner as the load which it replaces. Examples are resistors used to replace antennas, batteries, loudspeakers, or the like. Includes single port terminations of twin lead, coaxial and waveguide transmission lines as low power terminations of a section of a transmission system in a specified manner. Includes dummy loads when arranged in a group or bank. Excludes:power absorbers. See also load bank, electrical.

0.270 inches nominal body diameter, 1.115 inches nominal body length, 150.000 picofarads single section capacitance value per section, 0.900 inches nominal center to center distance between terminals parallel to length, w/o mtg facilities, radial terminals body style.

NSN 5910-00-195-6701 Datasheet

(NSN) National Stock Number

5910-00-195-6701

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-195-6701

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Tue, Jan 1, 1963

Schedule B Code

8532290040

Body Diameter

0.270 inches nominal

Body Length

1.115 inches nominal

Body Style

w/o mtg facilities, radial terminals

Capacitance Value Per Section

150.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Length

0.900 inches nominal

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

500.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-c-20/11 government specification

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

-220.0 single section

Terminal Diameter

0.025 inches nominal

Terminal Length

1.250 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-20 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-5.00 to 5.00 percent single section

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-60.0 to 60.0 single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

81350

Joint Army-Navy Specifications Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-195-6701?

   The FSCG of the NSN 5910-00-195-6701 is 5910

2. Does the NSN 5910-00-195-6701 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-195-6701 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-195-6701 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-195-6701 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-195-6701 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963