NSN CC50CH8R0F

An item designed to electrically and physically accommodate cable connectors and the terminations to which the cable would normally be connected, and thereby provide facilities for the insertion of test equipment leads, probes, and the like, for test and/or monitoring of power, intelligence, and the like, that may be on the wire complement of the cable. The item may provide facilities for either series, shunt, or interwire tests of the cable under actual operating conditions.

0.120 inches nominal body length, 0.250 inches nominal center to center distance between terminals parallel to diameter, 0.280 inches nominal body diameter, 8.000 picofarads single section capacitance value per section, w/o mtg facilities, radial terminals body style.

NSN 5910-01-060-7684 Datasheet

(NSN) National Stock Number

5910-01-060-7684

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-060-7684

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Thu, Jun 1, 1978

Schedule B Code

8532290040

Body Diameter

0.280 inches nominal

Body Length

0.120 inches nominal

Body Style

w/o mtg facilities, radial terminals

Capacitance Value Per Section

8.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Diameter

0.250 inches nominal

Dissipation Factor At Reference Temp In Percent

0.1500

Insulation Resistance At Reference Temp

100000.0 megohms

Material

ceramic case

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

500.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

0.0 single section

Terminal Diameter

0.025 inches nominal

Terminal Length

1.250 inches minimum

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-20/16 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-60.0 to 60.0 single section

Tolerance Range Per Section

-1.00 to 1.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-060-7684?

   The FSCG of the NSN 5910-01-060-7684 is 5910

2. Does the NSN 5910-01-060-7684 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-060-7684 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-060-7684 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-01-060-7684 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-060-7684 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Thu, Jun 1, 1978