NSN CC52TH101G

An item consisting of an electrically conductive material designed to furnish a surface which will physically and electrically meet another conducting surface for the purpose of transferring electrical energy and/or opening and closing circuits. Includes moving contacts which make and/or slide over stationary contacts or other stationary conductive material to a resulting fixed position. Excludes:items which are used in conjunction with continually moving surfaces or which make contact by gripping action of the contact surfaces. See also clip, electrical; clamp, electrical; brush, electrical contact; plug, tip; and jack, tip.

0.550 inches nominal body diameter, w/o mtg facilities, radial terminals body style, 0.120 inches nominal body length, 0.315 inches minimum and 0.435 inches maximum center to center distance between terminals parallel to diameter, 100.000 picofarads single section capacitance value per section.

NSN 5910-00-840-6530 Datasheet

(NSN) National Stock Number

5910-00-840-6530

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-840-6530

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Mon, Jan 1, 1962

Schedule B Code

8532290040

Body Diameter

0.550 inches nominal

Body Length

0.120 inches nominal

Body Style

w/o mtg facilities, radial terminals

Capacitance Value Per Section

100.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Diameter

0.315 inches minimum and 0.435 inches maximum

Features Provided

hermetically sealed case

Insulation Resistance At Maximum Operating Temp

1000.0 megohms

Insulation Resistance At Reference Temp

50000.0 megohms

Material

ceramic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

500.0 dc single section

Power Factor At Reference Temp In Percent

1.0000

Quality Factor At Reference Temp

1000.0000

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

-470.0 single section

Terminal Length

1.250 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-20 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-2.00 to 2.00 percent single section

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-60.0 to 60.0 single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

18796

Murata Erie North America Inc State College Opns

U.s./canadian manufacturers

51406

Murata Erie North America Inc Headquarters and Georgia Opns

U.s./canadian manufacturers

A00AM

E.c.a Etablissement Central des Approvisionnements des Forces Armees Royales

Military standards and standards organizations (ex:stanags,milspecs,defstans)

72982

Erie Specialty Products Inc

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-840-6530?

   The FSCG of the NSN 5910-00-840-6530 is 5910

2. Does the NSN 5910-00-840-6530 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-840-6530 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-840-6530 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-00-840-6530 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-840-6530 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962