NSN CCMR15

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

normal instantaneous circuit over-current interruption type, 600.0 ac maximum voltage rating in volts, 15.000 continuous current rating in amps, logistics support vessel (lsv) end item identification, tube type body style.

NSN 5920-01-448-2843 Datasheet

(NSN) National Stock Number

5920-01-448-2843

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5920 - Fuses, Arrestors, Absorbers and Protectors

(NIIN) National Item Identification Number

01-448-2843

Requires Demilitarization

Yes

(INC) Item Name Code

00248

Date

Tue, Aug 26, 1997

End Item Identification

logistics support vessel (lsv)

Body Style

tube type

Circuit Over-Current Interruption Type

normal instantaneous

Continuous Current Rating In Amps

15.000

Maximum Voltage Rating In Volts

600.0 ac

Overall Diameter

0.406 inches nominal

Overall Length

1.500 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000248

Cross Reference

CAGE Codes

53711

Naval Sea Systems Command

U.s./canadian manufacturers

75915

Littelfuse, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34740

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062060

Questions & Answers

1. What is the FSCG of the NSN 5920-01-448-2843?

   The FSCG of the NSN 5920-01-448-2843 is 5920

2. Does NSN 5920-01-448-2843 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5920-01-448-2843 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5920-01-448-2843 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5920-01-448-2843 was assigned to the Federal Catalog?

   It was assigned 29 years ago, on Tue, Aug 26, 1997