NSN CD4-A3A3A3A6-50-480-9

Two or more individual fixed, variable, thermal, or adjustable resistors on a common mounting or mounted on each other. The resistors must be separable and each must be capable of functioning in accordance with its applicable item name. For variable resistors mounted in tandem with a common or dual concentric shaft, see resistor, variable (as modified) and attenuator, variable. For inseparable resistors permanently cased, sealed or potted together to form a multisection unit, see resistor assortment; resistor set, matched; and items which have wire leads temporarily twisted together, or are otherwise physically attached solely for convenience in handling or shipping.

magnetic blowout arc quenching method, trip-reset actuator function, multipole-multiple actuator type body style, at each pole actuator position designation, 5.844 inches nominal body length.

NSN 5925-01-080-1768 Datasheet

(NSN) National Stock Number

5925-01-080-1768

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-080-1768

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Fri, Jul 20, 1979

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at each pole

Arc Quenching Method

magnetic blowout

Body Length

5.844 inches nominal

Body Style

multipole-multiple actuator type

Body Width

4.128 inches nominal

Boss Height

0.218 inches nominal

Center To Center Distance Between Terminals Parallel To Length

3.546 inches nominal

Center To Center Distance Between Terminals Parallel To Width

1.032 inches nominal

Circuit Protection Type

overcurrent all locations

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.032 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

2.750 inches nominal

External Actuator Linkage Arrangement

one, two, three, and four linked

Fragility Factor

moderately rugged

Frequency In Hertz

60.0 all locations

Inclosure Protection Type For Which Designed

fungus resistant and moisture resistant

Internal Trip Release Configuration

relay trip fourth location

Internal Trip Release Configuration

series trip second location

Internal Trip Release Configuration

series trip third location

Internal Trip Release Configuration

series trip first location

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

4 toggle

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

50.0 amperes ac all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

5000.0 ac all locations

Mounting Facility Type And Quantity

8 slot

Mounting Slot Width

0.138 inches nominal

Mounting Surface To Terminal End Distance

2.609 inches nominal

Operating Voltage Type And Rating Per Pole In Volts

480.0 ac all locations

Pole Quantity

4

Reset Method

manual

Special Handling Feature

magnetic

Storage Type

general purpose warehouse

Terminal Type And Quantity

10 threaded stud

Trip Release Characteristic

time delay all locations

Trip Release Method

magnetic-hydraulic all locations

Trip Delay Time In Seconds Per Rated Continuous Current

20.000 minimum at 200 pct and 125.000 maximum at 200 pct all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

125.0 all locations

Unpackaged Unit Weight

2.438 pounds nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

74193

Eaton Corp Heinemann Products Commercial Controls Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-080-1768?

   The FSCG of the NSN 5925-01-080-1768 is 5925

2. Does the NSN 5925-01-080-1768 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-080-1768 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-080-1768 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-080-1768 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-080-1768 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Fri, Jul 20, 1979