NATO Stock Number
5990-00-904-7315
Sold in multiples of
1 EA
DEMIL
DEMIL/MLI
Body Material
Steel, corrosion resisting
Body Style
Standard round b
Shoulder Diameter
Between 0.8118 inches and 0.8123 inches
Pilot Diameter
Between 0.5000 inches and 0.5005 inches
Overall Length
1.6650 inches
Flange Diameter
Between 0.9360 inches and 0.9370 inches
Flange Thickness
Between 0.0580 inches and 0.0680 inches
Undercut Width
Between 0.0570 inches and 0.0670 inches
Shaft Diameter
0.0895 inches single shaft and 0.0900 inches single shaft
Shaft Length
0.3370 inches single shaft
Fragility Factor
Moderately rugged
Body Size
10
Stator Input Voltage Rating In Volts
11.8
Stator Input Current Rating
100.0 milliamperes
Stator Input Electrical Power Rating
250.0 milliwatts
Frequency In Hertz
400.0
Zro Resistance In Ohms
Between 28.90 and 39.10
Rotor Dc Resistance In Ohms
Between 28.80 and 35.20
Stator Dc Resistance In Ohms
Between 22.50 and 27.50
Phase Shift Angle In Deg
10.200 output to input
Maximum Fundamental Null Voltage In Millivolts Per Volt
60.00 output
Actuator Friction Torque At Minus 55 Deg Celsius
9.00 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius
3.00 centimeter-grams
Pilot Length
Between 0.0350 inches and 0.0450 inches
Shoulder Length
Between 0.0570 inches and 0.0670 inches
Mounting Surface To Terminal End Distance
1.1900 inches
Shaft Maximum Runout
0.0010 inches
Terminal Location
Rear
Plus J Zro Reactance In Ohms
Between 107.10 and 130.90
Shaft Slot Depth
0.1880 inches single shaft
Shaft Slot Width
0.1250 inches single shaft
Shaft Type
Round, slotted single shaft
Transformation Ratio
Between 1.028 rotor to stator and 1.090 rotor to stator
Test Data Document
10001-2325877 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
6 wire lead
