NSN CDR12BP2R2ABUS

A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use post, electrical-mechanical equipment. See also nut (1), plain, knurled. (when height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

0.055 inches nominal body width, 2.2 picofarads single section capacitance value per section, 0.055 inches nominal body length, chip type body style, 0.020 inches minimum and 0.057 inches maximum body height.

NSN 5910-01-682-2871 Datasheet

(NSN) National Stock Number

5910-01-682-2871

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-682-2871

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Wed, Jul 31, 2019

Schedule B Code

8532290040

Body Height

0.020 inches minimum and 0.057 inches maximum

Body Length

0.055 inches nominal

Body Width

0.055 inches nominal

Body Style

chip type

Capacitance Value Per Section

2.2 picofarads single section

Dissipation Factor At Reference Temp In Percent

0.15

Insulation Resistance At Maximum Operating Temp

100000.0 megohms

Insulation Resistance At Reference Temp

1000000.0 megohms

Material

ceramic case

Part Name Assigned By Controlling Agency

capacitor, chip, multiple layer, fixed, ceramic dielectric

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Reference Temp At Which Rated

25.0 celsius

Reliability Failure Rate Level In Percent

0.001

Reliability Indicator

established

Schematic Diagram Designator

no common or grounded electrode(s)

Section Quantity

1

Terminal Length

0.010 inches nominal

Terminal Type And Quantity

2 bonding pad

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-30.0 to 30.0 single section

Tolerance Range Per Section

-0.10 to 0.10 picofarads single section

Voltage Temp Limits Per Section In Percent Capacitance Change

-25.0 to 25.0 without voltage applied single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-682-2871?

   The FSCG of the NSN 5910-01-682-2871 is 5910

2. Does the NSN 5910-01-682-2871 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-682-2871 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-682-2871 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-01-682-2871 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-682-2871 was assigned to the Federal Catalog?

   It was assigned 7 years ago, on Wed, Jul 31, 2019