NSN CDR12BP4R7ACUR

An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.

0.040 inches minimum and 0.070 inches maximum body length, chip type body style, mode-s beacon interrogator end item identification, 0.030 inches minimum and 0.080 inches maximum body width, 0.020 inches minimum and 0.057 inches maximum body height.

NSN 5910-01-356-8419 Datasheet

(NSN) National Stock Number

5910-01-356-8419

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-356-8419

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Fri, Apr 10, 1992

Schedule B Code

8532290040

End Item Identification

mode-s beacon interrogator

Body Height

0.020 inches minimum and 0.057 inches maximum

Body Length

0.040 inches minimum and 0.070 inches maximum

Body Width

0.030 inches minimum and 0.080 inches maximum

Body Style

chip type

Capacitance Value Per Section

4.700 picofarads single section

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Reliability Failure Rate Level In Percent

0.001

Reliability Indicator

established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Type And Quantity

2 bonding pad

Tolerance Range Per Section

-0.10 to 0.10 picofarads single section

Identification

Demilitarization Code

B - Usml items - mutilation to the point of scrap required worldwide. (note 7).

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-356-8419?

   The FSCG of the NSN 5910-01-356-8419 is 5910

2. Does the NSN 5910-01-356-8419 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-356-8419 require demilitarization?

   Usml items - mutilation to the point of scrap required worldwide. (note 7).

4. Does NSN 5910-01-356-8419 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-01-356-8419 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-356-8419 was assigned to the Federal Catalog?

   It was assigned 34 years ago, on Fri, Apr 10, 1992