NSN CDR14BG151DGSM

chip type body style, 0.090 inches minimum and 0.145 inches maximum body length, 0.100 inches nominal body diameter, 0.110 inches nominal body width, 0.030 inches minimum and 0.102 inches maximum body height.

NSN 5910-01-252-9690 Datasheet

(NSN) National Stock Number

5910-01-252-9690

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-252-9690

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Fri, Apr 10, 1987

Schedule B Code

8532290040

Body Diameter

0.100 inches nominal

Body Height

0.030 inches minimum and 0.102 inches maximum

Body Length

0.090 inches minimum and 0.145 inches maximum

Body Width

0.110 inches nominal

Body Style

chip type

Capacitance Value Per Section

150.000 picofarads single section

Dissipation Factor At Reference Temp In Percent

0.050

Insulation Resistance At Maximum Operating Temp

100000.0 megohms

Insulation Resistance At Reference Temp

1000000.0 megohms

Material

ceramic or glass case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

300.0 dc single section

Quality Factor At Reference Temp

2500.000

Reliability Failure Rate Level In Percent

0.0100

Reliability Indicator

established

Schematic Diagram Designator

no common or grounded electrode(s)

Section Quantity

1

Specification/Standard Data

81349-mil-c-55681/4 government specification

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

90.0 single section

Terminal Length

0.015 inches nominal

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 bonding pad

Test Data Document

"81349-mil-c-55681 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-20.0 to 20.0 single section

Tolerance Range Per Section

-1.00 to 1.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

97942

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Systems Corporation Electronic Systems

U.s./canadian manufacturers

13499

Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems

U.s./canadian manufacturers

29990

American Technical Ceramics Corp Dba Atc

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

51406

Murata Erie North America Inc Headquarters and Georgia Opns

U.s./canadian manufacturers

05079

Vishay Sprague, Inc. Dba Vishay Sprague Inc

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-252-9690?

   The FSCG of the NSN 5910-01-252-9690 is 5910

2. Does the NSN 5910-01-252-9690 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-252-9690 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-252-9690 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-252-9690 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-252-9690 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Fri, Apr 10, 1987