NSN CE45C300M

The components and items required to operate a complete wire conducted system specifically designed to provide a two-way voice communication with selective ringing. The system is normally common-battery operated, but may include provisions for the use of local batteries in each sub-station. May include provisions for connecting to other telephone systems. It may readily be used as a transportable or fixed system.

2.312 inches nominal body length, 1.375 inches nominal body diameter, aluminum capacitive electrode material, plain foil anode type, w/thd bushing mtg, terminal(s) on one end body style.

NSN 5910-00-020-7869 Datasheet

(NSN) National Stock Number

5910-00-020-7869

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-020-7869

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Sat, Apr 29, 1967

Schedule B Code

8532290040

Anode Type

plain foil

Body Diameter

1.375 inches nominal

Body Length

2.312 inches nominal

Body Style

w/thd bushing mtg, terminal(s) on one end

Capacitive Electrode Material

aluminum

Capacitance Value Per Section

30.000 microfarads all sections

Dc Leakage At Reference Temp

130.000 microamperes

Dissipation Factor At Reference Temp In Percent

12.0000

Electrical Polarization

polarized

Features Provided

mounting hardware

Impedance At Minimum Operating Temp In Ohms

150.0

Mounting Facility Screw Thread Series Designator

un

Mounting Facility Type And Quantity

1 threaded bushing

Nominal Thread Size

0.875 inches

Nonderated Operating Temp

-40.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

250.0 dc all sections

Reliability Indicator

not established

Schematic Diagram Designator

one terminal common to each section

Section Quantity

2

Specification/Standard Data

81349-mil-c-62/7 government specification

Terminal Surface Treatment

solder

Terminal Type And Quantity

3 tab, solder lug

Test Data Document

"81349-mil-c-62 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-10.00 to 50.00 percent 1st section and -10.00 to 50.00 percent 2nd section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-020-7869?

   The FSCG of the NSN 5910-00-020-7869 is 5910

2. Does the NSN 5910-00-020-7869 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-020-7869 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-020-7869 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-020-7869 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-020-7869 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Sat, Apr 29, 1967