NSN CE56C851F

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

3.046 inches maximum body length, aluminum capacitive electrode material, 1.250 inches nominal body diameter, plain foil anode type, w/o mtg facilities, terminal(s) on one end body style.

NSN 5910-00-018-8750 Datasheet

(NSN) National Stock Number

5910-00-018-8750

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-018-8750

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Tue, Apr 25, 1967

Schedule B Code

8532290040

Anode Type

plain foil

Body Diameter

1.250 inches nominal

Body Length

3.046 inches maximum

Body Style

w/o mtg facilities, terminal(s) on one end

Capacitive Electrode Material

aluminum

Capacitance Value Per Section

850.000 microfarads single section

Dc Leakage At Reference Temp

220.000 microamperes

Dissipation Factor At Reference Temp In Percent

20.0000

Electrical Polarization

polarized

Impedance At Minimum Operating Temp In Ohms

9.0

Nonderated Operating Temp

-40.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

25.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Surface Treatment

nickel

Terminal Type And Quantity

2 standard tube base

Test Data Document

"81349-mil-c-62 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-10.00 to 75.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-018-8750?

   The FSCG of the NSN 5910-00-018-8750 is 5910

2. Does the NSN 5910-00-018-8750 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-018-8750 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-018-8750 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-018-8750 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-018-8750 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Tue, Apr 25, 1967