NSN CEM3A1186SP

An active semiconductor device with three or more electrodes. May or may not include mounting hardware and/or heatsink. Excludes:semiconductor device, diode and semiconductor device, thyristor. For solid state devices which are responsive to visible or infrared radiant energy, see semiconductor device, photo.

0.50000 dissipation factor at reference temp in percent, w/mtg tabs/flanges terminals on opposite surfaces body style, 0.300 picofarads single section capacitance value per section, 1.000 inches maximum body height, 2.405 inches maximum body length.

NSN 5910-01-210-7654 Datasheet

(NSN) National Stock Number

5910-01-210-7654

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-210-7654

Requires Demilitarization

Yes

(INC) Item Name Code

00005

Date

Mon, Jun 17, 1985

Schedule B Code

8532290020

Body Height

1.000 inches maximum

Body Length

2.405 inches maximum

Body Style

w/mtg tabs/flanges terminals on opposite surfaces

Capacitance Value Per Section

0.300 picofarads single section

Dissipation Factor At Reference Temp In Percent

0.50000

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.572 inches maximum

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

2.885 inches maximum

Insulation Resistance At Maximum Operating Temp

10000.0 megohms

Insulation Resistance At Reference Temp

100000.0 megohms

Material

plastic case

Mounting Facility Type And Quantity

2 unthreaded mounting holes

Nonderated Operating Temp

-45.6 celsius minimum and 71.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

2000.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Temp Coefficient Of Capacitance Range Per Section In Ppm Per Deg Celsius

-100.0 to 300.0 single section

Terminal Diameter

0.072 inches maximum

Terminal Length

0.375 inches maximum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 solder stud

Test Data Document

"81349-mil-c-39001 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-5.00 to 5.00 picofarads single section

Unthreaded Mounting Hole Diameter

0.211 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000005

Cross Reference

CAGE Codes

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

23280

Custom Electronics, Inc. Dba Custom Electronics Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0020

Description

fixed capacitors, mica dielectric, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-210-7654?

   The FSCG of the NSN 5910-01-210-7654 is 5910

2. Does the NSN 5910-01-210-7654 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290020

3. Does NSN 5910-01-210-7654 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-210-7654 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-210-7654 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-210-7654 was assigned to the Federal Catalog?

   It was assigned 41 years ago, on Mon, Jun 17, 1985