NSN CF05ARA334JM

An end cutting tool having two or more cutting edges, and having helical flutes or grooves adjacent thereto for the admission of coolant and the ejection of cuttings or chips. It is used for drilling holes in various materials. Excludes:drill, masonry (as modified); and drill,twist, bone. See also drill, pivot, jeweler's and drill, hardened steel, carbide tipped.

0.180 inches nominal body diameter, w/o mtg facilities, axial terminals body style, 0.330 microfarads single section capacitance value per section, 0.530 inches nominal body length, 0.300 dissipation factor at reference temp in percent.

NSN 5910-01-252-8659 Datasheet

(NSN) National Stock Number

5910-01-252-8659

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-252-8659

Requires Demilitarization

Yes

(INC) Item Name Code

31959

Date

Thu, Apr 9, 1987

Schedule B Code

8532290040

Body Diameter

0.180 inches nominal

Body Length

0.530 inches nominal

Body Style

w/o mtg facilities, axial terminals

Capacitance Value Per Section

0.330 microfarads single section

Dissipation Factor At Reference Temp In Percent

0.300

Insulation Resistance At Maximum Operating Temp

7000.0 megohm-microfarads

Insulation Resistance At Reference Temp

100000.0 megohm-microfarads

Material

plastic case

Nonderated Operating Temp

125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Reliability Indicator

established

Reliability Failure Rate Level In Percent

1.000

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-c-55514/4 government specification

Terminal Diameter

0.020 inches nominal

Terminal Length

1.625 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-55514 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-5.00 to 5.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0031959

Cross Reference

CAGE Codes

53711

Naval Sea Systems Command

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-252-8659?

   The FSCG of the NSN 5910-01-252-8659 is 5910

2. Does the NSN 5910-01-252-8659 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-252-8659 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-252-8659 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-252-8659 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-252-8659 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Thu, Apr 9, 1987