NSN CG1E

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.313 inches nominal bearing surface width, 1.719 inches nominal aperture diameter, asbestos alternative products environmental attribute code, metal winding w/ soft filler and outer ring cross-sectional shape style, 0.170 inches minimum and 0.180 inches maximum cross-sectional thickness.

NSN 5330-01-338-7910 Datasheet

(NSN) National Stock Number

5330-01-338-7910

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

01-338-7910

Requires Demilitarization

Yes

(INC) Item Name Code

37840

Date

Sun, May 12, 1991

Aperture Diameter

1.719 inches nominal

Bearing Surface Width

0.313 inches nominal

Cross-Sectional Shape Style

metal winding w/ soft filler and outer ring

Cross-Sectional Thickness

0.170 inches minimum and 0.180 inches maximum

Environmental Attribute Code

asbestos alternative products

Gage Ring Outside Diameter

3.000 inches nominal

Gage Ring Thickness

0.117 inches minimum and 0.131 inches maximum

Material Document And Classification

Material

Material

unable to decode

Maximum Pressure Rating

150.0 pounds per square inch (psi)

Nondefinitive Spec/Std Data

2 type and a class and ips11/4 size and 150 series

Outside Diameter

2.344 inches nominal

Style Designator

circular

Temp Rating

1050.0 fahrenheit

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0037840

Cross Reference

CAGE Codes

D9182

Zf Industrieantriebe Witten Gmbh

Non-us manufacturer (nato), other foreign organization or codification bureaus

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

U - 50.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

55210

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

194160

Questions & Answers

1. What is the FSCG of the NSN 5330-01-338-7910?

   The FSCG of the NSN 5330-01-338-7910 is 5330

2. Does NSN 5330-01-338-7910 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5330-01-338-7910 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5330-01-338-7910 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5330-01-338-7910 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Sun, May 12, 1991