NSN CL67BC431KPG

A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes:flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. Excludes:disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.

0.406 inches maximum body diameter, solid anode type, tantalum capacitive electrode material, w/o mtg facilities, axial terminals body style, 0.844 inches nominal body length.

NSN 5910-01-119-4347 Datasheet

(NSN) National Stock Number

5910-01-119-4347

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-119-4347

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Thu, Sep 24, 1981

Schedule B Code

8532290040

Anode Type

solid

Body Diameter

0.406 inches maximum

Body Length

0.844 inches nominal

Body Style

w/o mtg facilities, axial terminals

Capacitive Electrode Material

tantalum

Capacitance Value Per Section

430.000 microfarads single section

Case Insulation Material

plastic

Dc Leakage At Maximum Operating Temp

14.0 microamperes

Dc Leakage At Reference Temp

2.000 microamperes

Dissipation Factor At Reference Temp In Percent

46.0000

Electrical Polarization

polarized

Features Provided

hermetically sealed case

Impedance At Minimum Operating Temp In Ohms

25.0

Mil-Std-1276 Wire Lead Type Designator

n-4

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

8.0 dc single section

Reliability Failure Rate Level In Percent

0.0100

Reliability Indicator

established

Schematic Diagram Designator

electrode(s) grounded to case, w/gnd terminal

Specification/Standard Data

81349-mil-c-39006/22 government specification

Terminal Diameter

0.025 inches nominal

Terminal Length

2.250 inches nominal

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-39006 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-119-4347?

   The FSCG of the NSN 5910-01-119-4347 is 5910

2. Does the NSN 5910-01-119-4347 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-119-4347 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-119-4347 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-119-4347 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-119-4347 was assigned to the Federal Catalog?

   It was assigned 45 years ago, on Thu, Sep 24, 1981