NSN CLF-264

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

0.438 inches maximum body length, unable to decode frequency rating, unable to decode inductance rating, fixed inductance type, 0.665 inches minimum and 0.695 inches maximum body outside diameter.

NSN 5950-01-031-7744 Datasheet

(NSN) National Stock Number

5950-01-031-7744

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-031-7744

Requires Demilitarization

Yes

(INC) Item Name Code

00724

Date

Thu, Dec 2, 1976

Schedule B Code

8504900020

Body Length

0.438 inches maximum

Body Outside Diameter

0.665 inches minimum and 0.695 inches maximum

Frequency Rating

unable to decode

Inductance Rating

unable to decode

Inductance Type

fixed

Inclosure Type

hermetically sealed

Maximum Operating Temp

105.0 celsius

Mounting Method

unable to decode

Mounting Tab Width

0.079 inches minimum and 0.109 inches maximum

Rating Method

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

2 wire lead

Winding Operating Current

unable to decode

Winding Quantity

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000724

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

07388

Torotel, Inc. Div Torotel Products, Inc.

U.s./canadian manufacturers

15634

Magnetika Inc

U.s./canadian manufacturers

80223

United Transformer Corp Sub of Opt Industries Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34420

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063498

Schedule B & Trade

Schedule B

8504-90-0020

Description

transformer parts

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77129

(NAICS) North American Industrial Classification System

335311

Questions & Answers

1. What is the FSCG of the NSN 5950-01-031-7744?

   The FSCG of the NSN 5950-01-031-7744 is 5950

2. Does the NSN 5950-01-031-7744 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504900020

3. Does NSN 5950-01-031-7744 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-01-031-7744 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-01-031-7744 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-01-031-7744 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Thu, Dec 2, 1976