1. Home /
  2. FSC NSN Catalog /
  3. Capacitors /
  4. CM09CD100DP3

NSN CM09CD100DP3

Mica Dielectric Fixed Capacitor

A definite continuous length of cable,special purpose,electrical, having one or more ends processed or terminated in fittings which provide for connectionn to other items. For items which the rated working is 300 volts or more, see: cable assembly,power,electrical. Excludes items having branches or forks. Excludes: lead,test and cable and conduit assembly,electrical.

0.330 inches maximum body width, 0.300 inches minimum and 0.360 inches maximum body length, 0.100 inches minimum and 0.190 inches maximum body height, 10.000 picofarads single section capacitance value per section, w/o mtg facilities terminal(s) on one surface body style.

NSN 5910-01-043-8880 Datasheet

(NSN) National Stock Number
5910-01-043-8880
(FSC) Federal Supply Classification
5910 - Capacitors
(NIIN) National Item Identification Number
01-043-8880
Requires Demilitarization
Yes
(INC) Item Name Code
00005
Date
Sat, Jul 2, 1977
Schedule B Code
8532290020
Body Height
0.100 inches minimum and 0.190 inches maximum
Body Length
0.300 inches minimum and 0.360 inches maximum
Body Width
0.330 inches maximum
Body Style
w/o mtg facilities terminal(s) on one surface
Capacitance Value Per Section
10.000 picofarads single section
Center To Center Distance Between Terminals Parallel To Length
0.150 inches nominal
Dissipation Factor At Reference Temp In Percent
0.0052
Insulation Resistance At Maximum Operating Temp
5000.0 megohms
Insulation Resistance At Reference Temp
100000.0 megohms
Material
plastic case
Nonderated Operating Temp
-55.0 celsius minimum and 150.0 celsius maximum
Nonderated Continuous Voltage Rating And Type Per Section
500.0 dc single section
Reliability Failure Rate Level In Percent
0.0100
Reliability Indicator
established
Schematic Diagram Designator
no common or grounded electrode(s)
Specification/Standard Data
81349-mil-c-39001/5 government specification
Temp Coefficient Of Capacitance Range Per Section In Ppm Per Deg Celsius
-200.0 to 200.0 single section
Terminal Diameter
0.016 inches nominal
Terminal Length
1.000 inches minimum
Terminal Surface Treatment
solder
Terminal Type And Quantity
2 uninsulated wire lead
Test Data Document
"81349-mil-c-39001 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
Tolerance Range Per Section
-0.50 to 0.50 percent single section

Identification

Demilitarization Code
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Precious Metals Indicator
A - Item does not contain precious metal.
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Pseudo Item Name Code
0000005

Cross Reference

CAGE Codes

A486G
Nimikkeistokeskus Ncb Finland
Government departments or units, including military organizations
97942
Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Systems Corporation Electronic Systems
U.s./canadian manufacturers
96214
Raytheon Company Dba Raytheon
U.s./canadian manufacturers
14655
Cornell-Dubilier Electronics
U.s./canadian manufacturers
81349
Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
Military standards and standards organizations (ex:stanags,milspecs,defstans)
72136
Electro Motive Corp Subsidiary of International Electronics Corp
U.s./canadian manufacturers

Freight Information

Air Commodity
HZ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
National Motor Freight Class Rating
P - 77.5
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
Z - No special type of cargo code applicable
Uniform Freight Classification Item Number
34450
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
National Motor Freight Classification Item Number
061400

Schedule B & Trade

Schedule B
8532-29-0020
Description
fixed capacitors, mica dielectric, nesoi
End Use
20005 - Electric apparatus
Unit of Quantity
NO
USDA
Yes
(SITC) Standard International Trade Classification
77867
(NAICS) North American Industrial Classification System
334416

Questions & Answers

  1. What is the FSCG of the NSN 5910-01-043-8880?

    The FSCG of the NSN 5910-01-043-8880 is 5910

  2. Does the NSN 5910-01-043-8880 have a Schedule B code assigned?

    Yes, the Schedule B code is 8532290020

  3. Does NSN 5910-01-043-8880 require demilitarization?

    Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

  4. Does NSN 5910-01-043-8880 contain precious materials?

    Item does not contain precious metal.

  5. Does NSN 5910-01-043-8880 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  6. When the NSN 5910-01-043-8880 was assigned to the Federal Catalog?

    It was assigned 49 years ago, on Sat, Jul 2, 1977

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.