NSN CM15FD121GP3

A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes:bushing, drill, jig.

0.188 inches nominal body width, w/o mtg facilities, terminals on opposite surfaces body style, 0.297 inches nominal body height, 120.000 picofarads single section capacitance value per section, 0.516 inches nominal body length.

NSN 5910-00-984-7787 Datasheet

(NSN) National Stock Number

5910-00-984-7787

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-984-7787

Requires Demilitarization

Yes

(INC) Item Name Code

00005

Date

Mon, Jan 1, 1962

Schedule B Code

8532290020

Body Height

0.297 inches nominal

Body Length

0.516 inches nominal

Body Width

0.188 inches nominal

Body Style

w/o mtg facilities, terminals on opposite surfaces

Capacitance Value Per Section

120.000 picofarads single section

Dissipation Factor At Reference Temp In Percent

0.0007

Insulation Resistance At Maximum Operating Temp

5000.0 megohms

Insulation Resistance At Reference Temp

10000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 150.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

500.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Temp Coefficient Of Capacitance Range Per Section In Ppm Per Deg Celsius

+0.0 to 70.0 single section

Terminal Length

1.125 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-5/1 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-2.00 to 2.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000005

Cross Reference

CAGE Codes

06KW9

Lucent Technologies Inc Dba Federal Marketing Group

U.s./canadian manufacturers

14028

Sypris Electronics, Llc

U.s./canadian manufacturers

05869

Raytheon Company Div Rmd Strategic

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0020

Description

fixed capacitors, mica dielectric, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-984-7787?

   The FSCG of the NSN 5910-00-984-7787 is 5910

2. Does the NSN 5910-00-984-7787 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290020

3. Does NSN 5910-00-984-7787 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-984-7787 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-00-984-7787 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-984-7787 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962