NSN CM55EE183GO3

A rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see door, access (as modified). Excludes:all covers not specifically designed to provide access for the purposes listed above.

1.310 inches nominal body width, 1.750 inches nominal body length, 0.470 inches nominal body height, 18000.000 picofarads single section capacitance value per section, w/o mtg hole(s)/slot(s), terminal(s) on one surface body style.

NSN 5910-00-142-3309 Datasheet

(NSN) National Stock Number

5910-00-142-3309

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-142-3309

Requires Demilitarization

Yes

(INC) Item Name Code

00005

Date

Wed, Jan 10, 1973

Schedule B Code

8532290020

Body Height

0.470 inches nominal

Body Length

1.750 inches nominal

Body Style

w/o mtg hole(s)/slot(s), terminal(s) on one surface

Body Width

1.310 inches nominal

Capacitance Value Per Section

18000.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Length

1.240 inches minimum and 1.260 inches maximum

Dissipation Factor At Reference Temp In Percent

0.1500

Insulation Resistance At Maximum Operating Temp

1500.0 megohms

Insulation Resistance At Reference Temp

10000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

600.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Temp Coefficient Of Capacitance Range Per Section In Ppm Per Deg Celsius

-20.0 to 100.0 single section

Terminal Type And Quantity

2 threaded hole

Test Data Document

"81349-milc5/9 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-2.00 to 2.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000005

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0020

Description

fixed capacitors, mica dielectric, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-142-3309?

   The FSCG of the NSN 5910-00-142-3309 is 5910

2. Does the NSN 5910-00-142-3309 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290020

3. Does NSN 5910-00-142-3309 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-142-3309 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-00-142-3309 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-142-3309 was assigned to the Federal Catalog?

   It was assigned 53 years ago, on Wed, Jan 10, 1973