NSN CM75FL153JM1

2.500 inches nominal body length, 3.250 inches nominal center to center distance between mounting facilities parallel to diameter, 15000.000 picofarads single section capacitance value per section, 2.810 inches nominal body diameter, w/mtg flanges, terminals on opposite ends body style.

NSN 5910-01-261-7788 Datasheet

(NSN) National Stock Number

5910-01-261-7788

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-261-7788

Requires Demilitarization

Yes

(INC) Item Name Code

00005

Date

Wed, Aug 19, 1987

Schedule B Code

8532290020

Body Diameter

2.810 inches nominal

Body Length

2.500 inches nominal

Body Style

w/mtg flanges, terminals on opposite ends

Capacitance Value Per Section

15000.000 picofarads single section

Center To Center Distance Between Mounting Facilities Parallel To Diameter

3.250 inches nominal

Dissipation Factor At Reference Temp In Percent

0.0010

Highest Frequency At Which Rf Current Rating Applies In Kilohertz

3000.0

Insulation Resistance At Maximum Operating Temp

15.0 megohm-microfarads

Insulation Resistance At Reference Temp

7500.0 megohms

Lowest Frequency At Which Rf Current Rating Applies In Kilohertz

100.0

Material

plastic case

Maximum Rf Current Rating At Highest Rated Frequency In Rms Amps

18.0

Maximum Rf Current Rating At Lowest Rated Frequency In Rms Amps

10.0

Mounting Facility Type And Quantity

4 unthreaded mounting holes

Nonderated Operating Temp

-55.0 celsius minimum and 70.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

3000.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-c-5/13 government specification

Temp Coefficient Of Capacitance Range Per Section In Ppm Per Deg Celsius

+0.0 to 70.0 single section

Terminal Type And Quantity

2 flange

Test Data Document

"81349-mil-c-5 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-5.00 to 5.00 percent single section

Unthreaded Mounting Hole Diameter

0.260 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000005

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0020

Description

fixed capacitors, mica dielectric, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-261-7788?

   The FSCG of the NSN 5910-01-261-7788 is 5910

2. Does the NSN 5910-01-261-7788 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290020

3. Does NSN 5910-01-261-7788 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-261-7788 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-261-7788 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-261-7788 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Wed, Aug 19, 1987