NSN CMR04C1R0DODP

A component which converts available alternating current or direct current electrical power into a form required to operate another component or set. The item may consist of a combination of an invertor,vibrator; vibrator,interrupter; vibrator,self-rectifying; invertor,power,static with a transformer and rectifies employing electron tubes, semiconductor diode or metallic (dry disc) type components, or the synchronized secondary contacts of a vibrator,self-rectifying or may consist of electron tubes, semiconductor diode or metallic (dry disc) type rectifiers and capacitors in transformerless (alternating current-direct current type) circuits which may be of the voltage-multiplier type. The item may incorporate a filter,direct current power and provisions for regulation of input and/or output voltage. The item may have special input, output, control or other facilities for applications in specialized environments such as medical, dental or other operations. Excludes battery chargers and rotating machinery types of items, such as motor generators and enerators and dynamotors.

0.100 inches minimum and 0.190 inches maximum body height, 0.330 inches maximum body width, 0.300 inches minimum and 0.360 inches maximum body length, w/o mtg facilities terminal(s) on one surface body style, 1.000 picofarads single section capacitance value per section.

NSN 5910-01-024-5484 Datasheet

(NSN) National Stock Number

5910-01-024-5484

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-024-5484

Requires Demilitarization

Yes

(INC) Item Name Code

00005

Date

Tue, Jul 13, 1976

Schedule B Code

8532290020

Body Height

0.100 inches minimum and 0.190 inches maximum

Body Length

0.300 inches minimum and 0.360 inches maximum

Body Width

0.330 inches maximum

Body Style

w/o mtg facilities terminal(s) on one surface

Capacitance Value Per Section

1.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Length

0.150 inches nominal

Dissipation Factor At Reference Temp In Percent

0.0500

Insulation Resistance At Maximum Operating Temp

10000.0 megohms

Insulation Resistance At Reference Temp

100000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

500.0 dc single section

Reliability Failure Rate Level In Percent

0.1000

Reliability Indicator

established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-c-39001/5 government specification

Temp Coefficient Of Capacitance Range Per Section In Ppm Per Deg Celsius

-200.0 to 200.0 single section

Terminal Diameter

0.016 inches nominal

Terminal Length

1.000 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-39001 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-0.50 to 0.50 picofarads single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

SMS - Defense logistics agency, enterprise business systems

Pseudo Item Name Code

0000005

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0020

Description

fixed capacitors, mica dielectric, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-024-5484?

   The FSCG of the NSN 5910-01-024-5484 is 5910

2. Does the NSN 5910-01-024-5484 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290020

3. Does NSN 5910-01-024-5484 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-024-5484 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-01-024-5484 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-024-5484 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Tue, Jul 13, 1976