NSN CMR05F331JPDM

An adapter designed to be mounted on a switch so that the switch may be opened or closed by an action of force not adapted to directly actuate the integral switching mechanism. Does not include knobs. See also extension, shaft.

0.470 inches maximum body length, 0.390 inches maximum body width, w/o mtg facilities terminal(s) on one surface body style, 330.000 picofarads single section capacitance value per section, 0.210 inches maximum body height.

NSN 5910-01-052-3956 Datasheet

(NSN) National Stock Number

5910-01-052-3956

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-052-3956

Requires Demilitarization

Yes

(INC) Item Name Code

00005

Date

Thu, Dec 15, 1977

Schedule B Code

8532290020

Body Height

0.210 inches maximum

Body Length

0.470 inches maximum

Body Width

0.390 inches maximum

Body Style

w/o mtg facilities terminal(s) on one surface

Capacitance Value Per Section

330.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Length

0.225 inches nominal

Dissipation Factor At Reference Temp In Percent

0.0005

Insulation Resistance At Reference Temp

100000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 150.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

500.0 dc single section

Reliability Indicator

established

Reliability Failure Rate Level In Percent

1.0000

Schematic Diagram Designator

no common or grounded electrode(s)

Temp Coefficient Of Capacitance Range Per Section In Ppm Per Deg Celsius

+0.0 to 70.0 single section

Terminal Diameter

0.025 inches nominal

Terminal Length

1.000 inches minimum

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-39001/5 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-5.00 to 5.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

FGZ - Ogden air logistics center 5851 f ave hill afb, ut 84056-5713

Pseudo Item Name Code

0000005

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0020

Description

fixed capacitors, mica dielectric, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-052-3956?

   The FSCG of the NSN 5910-01-052-3956 is 5910

2. Does the NSN 5910-01-052-3956 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290020

3. Does NSN 5910-01-052-3956 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-052-3956 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-01-052-3956 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-052-3956 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Thu, Dec 15, 1977