NSN CMR07F103FODP

A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes:flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. Excludes:disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.

0.700 inches minimum and 0.800 inches maximum body length, 0.010 microfarads single section capacitance value per section, w/o mtg facilities terminal(s) on one surface body style, 0.890 inches maximum body width, 0.200 inches minimum and 0.340 inches maximum body height.

NSN 5910-01-049-3154 Datasheet

(NSN) National Stock Number

5910-01-049-3154

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-049-3154

Requires Demilitarization

Yes

(INC) Item Name Code

00005

Date

Sun, Oct 16, 1977

Schedule B Code

8532290020

Body Height

0.200 inches minimum and 0.340 inches maximum

Body Length

0.700 inches minimum and 0.800 inches maximum

Body Style

w/o mtg facilities terminal(s) on one surface

Body Width

0.890 inches maximum

Capacitance Value Per Section

0.010 microfarads single section

Center To Center Distance Between Terminals Parallel To Length

0.425 inches nominal

Dissipation Factor At Reference Temp In Percent

0.0020

Insulation Resistance At Maximum Operating Temp

33.0 megohm-microfarads

Insulation Resistance At Reference Temp

1000.0 megohm-microfarads

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

500.0 dc single section

Reliability Failure Rate Level In Percent

0.0100

Reliability Indicator

established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-c-39001/5 government specification

Temp Coefficient Of Capacitance Range Per Section In Ppm Per Deg Celsius

+0.0 to 70.0 single section

Terminal Diameter

0.040 inches nominal

Terminal Length

1.000 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-39001 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-1.00 to 1.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000005

Cross Reference

CAGE Codes

97942

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Systems Corporation Electronic Systems

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

72136

Electro Motive Corp Subsidiary of International Electronics Corp

U.s./canadian manufacturers

06KW9

Lucent Technologies Inc Dba Federal Marketing Group

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0020

Description

fixed capacitors, mica dielectric, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-049-3154?

   The FSCG of the NSN 5910-01-049-3154 is 5910

2. Does the NSN 5910-01-049-3154 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290020

3. Does NSN 5910-01-049-3154 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-049-3154 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-049-3154 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-049-3154 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Sun, Oct 16, 1977