NSN COMP12X080

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

commutator paper; non-conductive special features, 12.00 inches nominal overall width, paper backing material, 80 screen grit size designator, metalworking usage design.

NSN 5350-01-625-8545 Datasheet

(NSN) National Stock Number

5350-01-625-8545

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5350 - Abrasive Materials

(NIIN) National Item Identification Number

01-625-8545

Requires Demilitarization

Yes

(INC) Item Name Code

02604

Date

Tue, Feb 18, 2014

Schedule B Code

6805200000

Material

paper backing

Overall Width

12.00 inches nominal

Screen Grit Size Designator

80

Special Features

commutator paper; non-conductive

Usage Design

metalworking

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002604

Cross Reference

CAGE Codes

38664

Martindale Electric Company, The

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

T - 55.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

02010

Water Commodity

721 - Paper, other than napkins or towels

National Motor Freight Classification Item Number

001100

Schedule B & Trade

Schedule B

6805-20-0000

Description

abrasives on a base of paper or paperboard only

End Use

12760 - Mineral supplies-manufactured

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

66322

(NAICS) North American Industrial Classification System

327910

Questions & Answers

1. What is the FSCG of the NSN 5350-01-625-8545?

   The FSCG of the NSN 5350-01-625-8545 is 5350

2. Does the NSN 5350-01-625-8545 have a Schedule B code assigned?

   Yes, the Schedule B code is 6805200000

3. Does NSN 5350-01-625-8545 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5350-01-625-8545 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5350-01-625-8545 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5350-01-625-8545 was assigned to the Federal Catalog?

   It was assigned 12 years ago, on Tue, Feb 18, 2014