NSN CP103ISSUEA

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

13.500 inches nominal body length, 4.000 microfarads single section capacitance value per section, 12.875 inches nominal body height, 5.125 inches nominal body width, w/o mtg facilities, terminal(s) on one surface body style.

NSN 5910-00-280-6314 Datasheet

(NSN) National Stock Number

5910-00-280-6314

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-280-6314

Requires Demilitarization

Yes

(INC) Item Name Code

00003

Date

Tue, Jan 1, 1963

Schedule B Code

8532250080

Body Height

12.875 inches nominal

Body Length

13.500 inches nominal

Body Style

w/o mtg facilities, terminal(s) on one surface

Body Width

5.125 inches nominal

Capacitance Value Per Section

4.000 microfarads single section

Case Insulation Material

plastic

Center To Center Distance Between Terminals Parallel To Length

6.750 inches nominal

Dissipation Factor At Reference Temp In Percent

0.0050

Insulation Resistance At Reference Temp

10.0 megohm-microfarads

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

10000.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Length

4.250 inches nominal

Terminal Height From Body

4.250 inches nominal

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 solder stud

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000003

Cross Reference

CAGE Codes

23126

Westinghouse Electric Corp Specialty Electronics Div

U.s./canadian manufacturers

00853

Cornell-Dubilier Marketing Inc

U.s./canadian manufacturers

06141

L3 Aviation Products, Inc. Dba L3 Technologies

U.s./canadian manufacturers

23160

Lindgren Rf Enclosures Inc Elmag Div

U.s./canadian manufacturers

82679

The Technical Material Corporation Dba T M C

Non-manufacturers

71436

Chicago Condenser Corporation Dba Chicago Condenser

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-280-6314?

   The FSCG of the NSN 5910-00-280-6314 is 5910

2. Does the NSN 5910-00-280-6314 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-00-280-6314 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-280-6314 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-280-6314 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-280-6314 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963