NSN CP40B2FF405M

An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or printed wiring board and is not designed to be mounted on a bulkhead, chasses, panel, printed wiring board, or the like. Excludes:jack, telephone; jack, tip; plug, telephone; plug tip; insert, electrical connector; connector body (as modified); and socket, plug-in, electronic components. See also lead assembly, electrical; wiring harness (as modified); and cable assembly (as modified). For items without inserts, see shell, electrical connector.

1.0000 dissipation factor at reference temp in percent, 4.000 microfarads single section capacitance value per section, 1.500 inches nominal body diameter, 5.250 inches nominal body length, w/thd bushing mtg, terminal(s) on one end body style.

NSN 5910-00-120-1678 Datasheet

(NSN) National Stock Number

5910-00-120-1678

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-120-1678

Requires Demilitarization

Yes

(INC) Item Name Code

00003

Date

Tue, Jan 1, 1963

Schedule B Code

8532250080

Body Diameter

1.500 inches nominal

Body Length

5.250 inches nominal

Body Style

w/thd bushing mtg, terminal(s) on one end

Capacitance Value Per Section

4.000 microfarads single section

Dissipation Factor At Reference Temp In Percent

1.0000

Features Provided

mounting hardware and hermetically sealed case

Insulation Resistance At Maximum Operating Temp

20.0 megohm-microfarads

Insulation Resistance At Reference Temp

2000.0 megohm-microfarads

Mounting Facility Screw Thread Series Designator

unf

Mounting Facility Type And Quantity

1 threaded bushing

Nominal Thread Size

0.750 inches

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

600.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

electrode(s) grounded to case

Terminal Length

1.000 inches nominal

Terminal Type And Quantity

1 threaded stud

Test Data Document

"81349-mil-c-25 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000003

Cross Reference

CAGE Codes

80034

Templetone Radio Mfg Corp

U.s./canadian manufacturers

28528

Itt Industries Inc Itt Aerospace Communications Div East

U.s./canadian manufacturers

37695

Raytheon Company

U.s./canadian manufacturers

11530

Lockheed Martin Corporation Div Lockheed Martin Information Systems & Global Solutions

U.s./canadian manufacturers

81350

Joint Army-Navy Specifications Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

84171

Rheinlander, Robert M

Non-manufacturers

14655

Cornell-Dubilier Electronics

U.s./canadian manufacturers

96296

Solar Mfg Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-120-1678?

   The FSCG of the NSN 5910-00-120-1678 is 5910

2. Does the NSN 5910-00-120-1678 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-00-120-1678 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-120-1678 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-120-1678 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-120-1678 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963