NSN CP53B5EF504M

An insulating element with or without contact(s) designed to fit into an adapter (2), connector; connector body, plug, electrical; connector body, receptacle, electrical; connector, plug, electrical; or connector, receptacle, electrical forming an integral liner or seat. Excludes:insulator (1), disk; insulator (1) plate; terminal (1), feedthru and terminal board. See also connector (as modified); connector body (as modified); and insert module, electrical connector.

1.125 inches nominal body height, 0.500 microfarads 1st section and 0.500 microfarads 2nd section and 0.500 microfarads 3rd section capacitance value per section, 2.000 inches nominal body length, 2.000 inches nominal body width, w/mtg tabs/flanges, terminal(s) on one surface body style.

NSN 5910-00-666-6356 Datasheet

(NSN) National Stock Number

5910-00-666-6356

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-666-6356

Requires Demilitarization

Yes

(INC) Item Name Code

00003

Date

Tue, Jan 1, 1963

Schedule B Code

8532250080

Body Height

1.125 inches nominal

Body Length

2.000 inches nominal

Body Style

w/mtg tabs/flanges, terminal(s) on one surface

Body Width

2.000 inches nominal

Capacitance Value Per Section

0.500 microfarads 1st section and 0.500 microfarads 2nd section and 0.500 microfarads 3rd section

Dissipation Factor At Reference Temp In Percent

1.0000

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

2.375 inches nominal

Features Provided

hermetically sealed case

Insulation Resistance At Maximum Operating Temp

100.0 megohm-microfarads

Mounting Facility Type And Quantity

2 unthreaded mounting holes

Nonderated Operating Temp

-85.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

600.0 dc all sections

Reliability Indicator

not established

Schematic Diagram Designator

electrode(s) grounded to case

Section Quantity

3

Terminal Type And Quantity

3 tab, solder lug

Test Data Document

"81349-mil-c-25/4 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-10.00 to 20.00 percent 1st section and -10.00 to 20.00 percent 2nd section and -10.00 to 20.00 percent 3rd section

Unthreaded Mounting Hole Diameter

0.188 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000003

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-666-6356?

   The FSCG of the NSN 5910-00-666-6356 is 5910

2. Does the NSN 5910-00-666-6356 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-00-666-6356 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-666-6356 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-666-6356 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-666-6356 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963