NSN CPR102333

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. Opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. Excludes:suppressor,ignition interference.

1.940 inches nominal fork depth, 0.485 inches nominal fork arm thickness, 0.750 inches nominal end radius, 2.620 inches nominal distance from pivot pinhole center to rod connection end, 0.780 inches nominal fork span width.

NSN 5340-01-038-1932 Datasheet

(NSN) National Stock Number

5340-01-038-1932

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-038-1932

Requires Demilitarization

Yes

(INC) Item Name Code

03796

Date

Thu, Mar 31, 1977

Distance From Pivot Pinhole Center To Rod Connection End

2.620 inches nominal

End Radius

0.750 inches nominal

Fork Span Width

0.780 inches nominal

Fork Arm Thickness

0.485 inches nominal

Fork Depth

1.940 inches nominal

Hole Diameter

0.766 inches minimum and 0.776 inches maximum

Material Document And Classification

qq-s-681,class 120-95 fed spec single material response overall

Material

steel comp 120-95 overall

Nominal Thread Size

0.750 inches rod connection

Overall Diameter

1.750 inches nominal

Style Designator

clevis

Surface Treatment Document And Classification

qq-p-416,type 2,class 3 fed spec single treatment response overall

Surface Treatment

cadmium overall

Thread Class

2b rod connection

Thread Direction

right-hand rod connection

Thread Length

0.156 inches nominal rod connection

Thread Series Designator

unf rod connection

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0003796

Cross Reference

CAGE Codes

A00AM

E.c.a Etablissement Central des Approvisionnements des Forces Armees Royales

Military standards and standards organizations (ex:stanags,milspecs,defstans)

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

U - 50.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49240

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

094140

Questions & Answers

1. What is the FSCG of the NSN 5340-01-038-1932?

   The FSCG of the NSN 5340-01-038-1932 is 5340

2. Does NSN 5340-01-038-1932 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-038-1932 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-01-038-1932 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-038-1932 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Thu, Mar 31, 1977