NSN CR6/U8M166700

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

0.478 inches minimum and 0.494 inches maximum center to center distance between terminals, 0.725 inches maximum body width, 0.775 inches maximum body length, 0.317 inches maximum body thickness, antiresonance circuit resonance.

NSN 5955-00-232-2895 Datasheet

(NSN) National Stock Number

5955-00-232-2895

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5955 - Oscillators and Piezoelectric Crystals

(NIIN) National Item Identification Number

00-232-2895

Requires Demilitarization

Yes

(INC) Item Name Code

00196

Date

Wed, May 23, 1973

Schedule B Code

8541900000

Body Length

0.775 inches maximum

Body Thickness

0.317 inches maximum

Body Width

0.725 inches maximum

Center To Center Distance Between Terminals

0.478 inches minimum and 0.494 inches maximum

Circuit Resonance

antiresonance

Drive Level Rating

27.0 milliwatts minimum and 33.0 milliwatts maximum

Equivalent Resistance Value In Ohms

50.0 minimum

Frequency Tolerance For Operating Temp In Percent

-0.005 to 0.005

Load Capacitance In Picofarads

12.5 minimum and 13.5 maximum

Mode Of Oscillation

fundamental

Operating Temp Range

-40.0 to 70.0 celsius

Overall Length

1.223 inches maximum

Overall Thickness

0.352 inches maximum

Overall Width

0.757 inches maximum

Specification/Standard Data

81349-mil-c-3098/78 government specification

Specified Frequency

8.1667 megahertz

Style Designator

oval body, pin terminals

Terminal Diameter

0.091 inches minimum and 0.095 inches maximum

Terminal Length

0.448 inches maximum

Test Data Document

"81349-mil-c-3098 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000196

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

W - Rating variable

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

8541-90-0000

Description

diode, transistor & similar semiconductor device parts

End Use

21320 - Semiconductors

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77688

(NAICS) North American Industrial Classification System

334419

Questions & Answers

1. What is the FSCG of the NSN 5955-00-232-2895?

   The FSCG of the NSN 5955-00-232-2895 is 5955

2. Does the NSN 5955-00-232-2895 have a Schedule B code assigned?

   Yes, the Schedule B code is 8541900000

3. Does NSN 5955-00-232-2895 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5955-00-232-2895 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5955-00-232-2895 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5955-00-232-2895 was assigned to the Federal Catalog?

   It was assigned 53 years ago, on Wed, May 23, 1973