NSN CSTDD475K035TX

solid anode type, chip type body style, 0.122 inches maximum body width, 0.275 inches minimum and 0.299 inches maximum body length, 0.157 inches minimum and 0.181 inches maximum body height.

NSN 5910-01-366-5343 Datasheet

(NSN) National Stock Number

5910-01-366-5343

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-366-5343

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Wed, Oct 28, 1992

Schedule B Code

8532290040

Anode Type

solid

Body Height

0.157 inches minimum and 0.181 inches maximum

Body Length

0.275 inches minimum and 0.299 inches maximum

Body Width

0.122 inches maximum

Body Style

chip type

Capacitive Electrode Material

tantalum

Capacitance Value Per Section

4.700 microfarads single section

Dc Leakage At Maximum Operating Temp

17.0 microamperes

Dc Leakage At Reference Temp

1.700 microamperes

Dissipation Factor At Reference Temp In Percent

6.000

Electrical Polarization

polarized

Equivalent Series Resistance At Reference Temp In Ohms

2.50

Material

ceramic case

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

35.0 dc single section

Reliability Failure Rate Level In Percent

0.100

Reliability Indicator

established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-c-55365/8 professional/industrial association specification

Terminal Length

0.039 inches minimum and 0.063 inches maximum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 tab, solder lug

Test Data Document

"81349-mil-c-55365 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

89954

Bae Systems Controls Inc.

U.s./canadian manufacturers

34303

Hilton Industries Inc Sub of Core Industries Inc

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

23386

Thales Defense & Security Inc Dba Thales Communications Inc

U.s./canadian manufacturers

31433

Kemet Electronics Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-366-5343?

   The FSCG of the NSN 5910-01-366-5343 is 5910

2. Does the NSN 5910-01-366-5343 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-366-5343 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-366-5343 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-366-5343 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-366-5343 was assigned to the Federal Catalog?

   It was assigned 33 years ago, on Wed, Oct 28, 1992