NSN CTC8A40

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

4.0 centimeter-grams maximum actuator friction torque at plus 25 deg celsius, 16.0 centimeter-grams maximum actuator friction torque at minus 55 deg celsius, -7.0 to 7.0 electrical error angular range in minutes, 8 body size, standard round a body style.

NSN 5990-00-824-9137 Datasheet

(NSN) National Stock Number

5990-00-824-9137

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5990 - Synchros and Resolvers

(NIIN) National Item Identification Number

00-824-9137

Requires Demilitarization

Yes

(INC) Item Name Code

15289

Date

Tue, Jan 1, 1963

Schedule B Code

9014900000

Actuator Friction Torque At Plus 25 Deg Celsius

4.0 centimeter-grams maximum

Actuator Friction Torque At Minus 55 Deg Celsius

16.0 centimeter-grams maximum

Body Size

8

Body Style

standard round a

Electrical Error Angular Range In Minutes

-7.0 to 7.0

Flange Diameter

0.7500 inches maximum

Flange Thickness

0.0620 inches nominal

Fragility Factor

moderately rugged

Frequency In Hertz

400.0 nominal

Material

aluminum body

Phase Shift Angle In Deg

8.500 output to input nominal

Pilot Diameter

0.5000 inches maximum

Pilot Length

0.0430 inches nominal

Plus J Zro Reactance In Ohms

1770.00 nominal

Plus J Zrs Reactance In Ohms

190.00 nominal

Plus J Zso Reactance In Ohms

330.00 nominal

Maximum Total Null Voltage Output In Millivolts Per Volt

30.00

Mounting Surface To Terminal End Distance

1.2410 inches maximum

Overall Length

1.6360 inches maximum

Rotor Dc Resistance In Ohms

365.00 nominal

Schematic Diagram Designator

1 y-rotor, 1 stator

Shaft End Play Determining Weight

8.0 ounces

Shaft End Play

0.0003 inches minimum and 0.0008 inches maximum

Shaft Diameter

0.0900 inches maximum single shaft

Shaft Maximum Runout

0.0010 inches

Shaft Maximum Radial Play

0.0005 inches

Shaft Radial Play Test Point

0.1250 inches maximum

Shaft Radial Play Determining Weight

4.0 ounces

Shaft Slot Depth

0.0250 inches nominal single shaft

Shaft Slot Width

0.0200 inches nominal single shaft

Shaft Type

round, slotted single shaft

Shaft Length

0.3320 inches nominal single shaft

Stator Dc Resistance In Ohms

64.00 nominal

Stator Input Current Rating

30.0 milliamperes nominal

Stator Input Electrical Power Rating

73.0 milliwatts nominal

Stator Input Voltage Rating In Volts

11.8 nominal

Terminal Location

rear

Terminal Type And Quantity

5 wire lead

Undercut Width

0.0620 inches nominal

Undercut Diameter

0.6910 inches maximum

Zro Resistance In Ohms

470.00 nominal

Zrs Resistance In Ohms

590.00 nominal

Zso Resistance In Ohms

81.00 nominal

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0015289

Cross Reference

CAGE Codes

14404

Ametek Technical & Industrial Products, Inc. Dba Tachtronic Instruments Division Div Ametek Technical and Industrial Products, Inc.

U.s./canadian manufacturers

97424

Ametek Inc Div Aerospace and Defense

U.s./canadian manufacturers

99932

Moog Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

9014-90-0000

Description

parts & accessories for direction finding compasses and other navigational instruments and appliances

End Use

22220 - Marine engines, parts

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87412

(NAICS) North American Industrial Classification System

334511

Questions & Answers

1. What is the FSCG of the NSN 5990-00-824-9137?

   The FSCG of the NSN 5990-00-824-9137 is 5990

2. Does the NSN 5990-00-824-9137 have a Schedule B code assigned?

   Yes, the Schedule B code is 9014900000

3. Does NSN 5990-00-824-9137 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5990-00-824-9137 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5990-00-824-9137 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5990-00-824-9137 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963