NSN CTM822VBK

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flowo s an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes:suppressor, ignition interference. See also resistor (1), fixentewire wound, inductive.

w/o mtg facilities, axial terminals body style, 0.688 inches nominal body length, 0.188 inches nominal body diameter, 1.0000 dissipation factor at reference temp in percent, 8200.000 picofarads single section capacitance value per section.

NSN 5910-00-836-8896 Datasheet

(NSN) National Stock Number

5910-00-836-8896

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-836-8896

Requires Demilitarization

Yes

(INC) Item Name Code

00006

Date

Mon, Jan 1, 1962

Schedule B Code

8532250080

Body Diameter

0.188 inches nominal

Body Length

0.688 inches nominal

Body Style

w/o mtg facilities, axial terminals

Capacitance Value Per Section

8200.000 picofarads single section

Dissipation Factor At Reference Temp In Percent

1.0000

Dielectric Material

plastic polyethylene terephthalate (pet)

Internal Electrical Connection Type

extended foil

Insulation Resistance At Maximum Operating Temp

300.0 megohms

Insulation Resistance At Reference Temp

100000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

100.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-c-27287/1 government specification

Terminal Diameter

0.025 inches nominal

Terminal Length

1.625 inches minimum and 2.625 inches maximum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-27287 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-5.00 to 5.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000006

Cross Reference

CAGE Codes

30598

Compunetics Inc Div Printed Circuit Boards

U.s./canadian manufacturers

33214

Aydin Corp Aydin Controls Div

U.s./canadian manufacturers

56289

Sprague Electric Co World Hqs

U.s./canadian manufacturers

96214

Raytheon Company Dba Raytheon

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-836-8896?

   The FSCG of the NSN 5910-00-836-8896 is 5910

2. Does the NSN 5910-00-836-8896 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-00-836-8896 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-836-8896 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-836-8896 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-836-8896 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962