NSN CX02F475K

An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and y-shaped adapters are all adapter, connector. Excludes:adapter, connector to lampbase; adapter, lampholder to connector; adapter (1), cable clamp to connector; and adapter, lampholder. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see adapter (1), electrical conduit.

0.425 inches maximum body length, tantalum capacitive electrode material, solid anode type, w/o mtg facilities, terminal(s) on one end body style, 0.175 inches maximum body diameter.

NSN 5910-01-228-8517 Datasheet

(NSN) National Stock Number

5910-01-228-8517

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-228-8517

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Sat, Mar 22, 1986

Schedule B Code

8532290040

Anode Type

solid

Body Diameter

0.175 inches maximum

Body Length

0.425 inches maximum

Body Style

w/o mtg facilities, terminal(s) on one end

Capacitive Electrode Material

tantalum

Capacitance Value Per Section

4.700 microfarads single section

Center To Center Distance Between Terminals Parallel To Diameter

0.250 inches nominal

Dc Leakage At Reference Temp

1.000 microamperes

Dissipation Factor At Reference Temp In Percent

6.0000

Electrical Polarization

polarized

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

10.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-c-49137/2 government specification

Terminal Diameter

0.020 inches nominal

Terminal Length

0.187 inches nominal

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-49137 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

31433

Kemet Electronics Corporation

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

05397

Union Carbide Corp Materials Systems Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-228-8517?

   The FSCG of the NSN 5910-01-228-8517 is 5910

2. Does the NSN 5910-01-228-8517 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-228-8517 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-228-8517 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-228-8517 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-228-8517 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Sat, Mar 22, 1986