NSN CY85D120K

A nonmetallic material manufactured in various cross-sectional shapes, impregnated with electrically conductive particles. It is designed to provide environmental sealing and electromagnetic interference shielding to electrical and electronic equipment. For items shaped from this material, see shielding gasket, electronic. See also wire mesh, knitted.

0.110 inches nominal body height, 0.030 inches minimum and 0.100 inches maximum body width, 12.000 picofarads single section capacitance value per section, 0.135 inches nominal body length, w/o mtg facilities, terminals on opposite surfaces body style.

NSN 5910-01-239-1629 Datasheet

(NSN) National Stock Number

5910-01-239-1629

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-239-1629

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Tue, Aug 26, 1986

Schedule B Code

8532290040

Body Height

0.110 inches nominal

Body Length

0.135 inches nominal

Body Width

0.030 inches minimum and 0.100 inches maximum

Body Style

w/o mtg facilities, terminals on opposite surfaces

Capacitance Value Per Section

12.000 picofarads single section

Dissipation Factor At Reference Temp In Percent

0.050

Insulation Resistance At Maximum Operating Temp

100000.0 megohms

Insulation Resistance At Reference Temp

1000000.0 megohms

Material

ceramic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

500.0 dc single section

Precious Material And Location

terminal surfaces silver

Quality Factor At Reference Temp

10000.000

Reliability Failure Rate Level In Percent

0.0100

Reliability Indicator

established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-c-55681/5 government specification

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

90.0 single section

Terminal Length

0.250 inches minimum

Terminal Surface Treatment

silver

Terminal Type And Quantity

2 ribbon

Test Data Document

"81349-mil-c-55681 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-2.00 to 2.00 percent single section

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-20.0 to 20.0 single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-239-1629?

   The FSCG of the NSN 5910-01-239-1629 is 5910

2. Does the NSN 5910-01-239-1629 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-239-1629 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-239-1629 contain precious materials?

   Item contains silver.

5. Does NSN 5910-01-239-1629 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-239-1629 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Tue, Aug 26, 1986