NSN D22932

An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and y-shaped adapters are all adapter, connector. Excludes:adapter, connector to lampbase; adapter, lampholder to connector; adapter (1), cable clamp to connector; and adapter, lampholder. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see adapter (1), electrical conduit.

2100.000 microfarads single section capacitance value per section, 1.180 inches nominal body width, w/thd mtg hole(s)/stud(s), terminal(s) on one surface body style, 1.400 inches nominal body length, 1.700 inches nominal body height.

NSN 5910-01-201-8580 Datasheet

(NSN) National Stock Number

5910-01-201-8580

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-201-8580

Requires Demilitarization

Yes

(INC) Item Name Code

00006

Date

Fri, Feb 22, 1985

Schedule B Code

8532250080

Body Height

1.700 inches nominal

Body Length

1.400 inches nominal

Body Style

w/thd mtg hole(s)/stud(s), terminal(s) on one surface

Body Width

1.180 inches nominal

Capacitance Value Per Section

2100.000 microfarads single section

Center To Center Distance Between Terminals Parallel To Width

0.590 inches nominal

Center To Center Distance Between Terminals Parallel To Length

0.150 inches minimum and 0.300 inches maximum

Criticality Code Justification

feat

Dissipation Factor At Reference Temp In Percent

8.0000

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.100 inches maximum

End Item Identification

uys1 advanced signal processor. 2m/ate microminiauture automatic test equipment, los angeles class ssn (688), sonar, an/bsy-1(v), sturgeon class ssn (637), an/uys-1 advanced signal processor, nimitz class cvn, tarawa class lha, wasp class lhd, emory s. land class as, forrestal class cv

Features Provided

hermetically sealed case

Mounting Facility Type And Quantity

2 threaded mounting studs

Nonderated Operating Temp

125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

15.0 dc single section

Reliability Indicator

not established

Special Features

weapon system essential

Terminal Diameter

0.030 inches minimum and 0.060 inches maximum

Terminal Length

1.000 inches minimum and 1.250 inches maximum

Terminal Type And Quantity

6 pin

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000006

Cross Reference

CAGE Codes

03640

Lockheed Martin Corporation Div Rotary and Mission Systems

U.s./canadian manufacturers

56289

Sprague Electric Co World Hqs

U.s./canadian manufacturers

1RUZ5

Palm Beach Components Inc.

Non-manufacturers

90201

Mallory Sonalert Products, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-201-8580?

   The FSCG of the NSN 5910-01-201-8580 is 5910

2. Does the NSN 5910-01-201-8580 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-01-201-8580 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-201-8580 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-201-8580 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-201-8580 was assigned to the Federal Catalog?

   It was assigned 41 years ago, on Fri, Feb 22, 1985