NSN D27094A

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1.750 inches nominal center to center distance between bolt holes along width, 2.030 inches nominal aperture length, solid single or composition cross-sectional shape style, 0.410 inches nominal hole diameter, 0.020 inches minimum and 0.026 inches maximum cross-sectional thickness.

NSN 5330-00-700-6868 Datasheet

(NSN) National Stock Number

5330-00-700-6868

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

00-700-6868

Requires Demilitarization

Yes

(INC) Item Name Code

04522

Date

Sun, Jan 1, 1961

Aperture Length

2.030 inches nominal

Center To Center Distance Between Bolt Holes Along Width

1.750 inches nominal

Cross-Sectional Shape Style

solid single or composition

Cross-Sectional Thickness

0.020 inches minimum and 0.026 inches maximum

Hole Diameter

0.410 inches nominal

Material

Overall Length

2.690 inches nominal

Overall Width

2.620 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

SMS - Defense logistics agency, enterprise business systems

Pseudo Item Name Code

0004522

Cross Reference

CAGE Codes

31007

Navistar International Corporation Dba Navistar

U.s./canadian manufacturers

44185

Tld Wollard Llc

Non-manufacturers

89346

Navistar Intl Corp Truck Br Ohio Plant

U.s./canadian manufacturers

24617

General Motors Corp

U.s./canadian manufacturers

70040

General Motors Llc Dba General Motors

U.s./canadian manufacturers

7X677

General Motors Llc Dba General Motors Llc

U.s./canadian manufacturers

63728

Sealcraft Corporation

Non-manufacturers

89536

Fluke Corp

U.s./canadian manufacturers

79150

Dana Automotive Systems Group, Llc Dba Dana Sealing Products

Non-manufacturers

A00AM

E.c.a Etablissement Central des Approvisionnements des Forces Armees Royales

Military standards and standards organizations (ex:stanags,milspecs,defstans)

9009H

Jednolity Indeks Materialowy - Uniform Material Index

Government departments or units, including military organizations

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

45152

Oshkosh Corp

U.s./canadian manufacturers

75Q65

Oshkosh Defense Llc

U.s./canadian manufacturers

56442

Diamond Reo Truck Co

U.s./canadian manufacturers

81574

Tce Canada Ltd

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

194120

Questions & Answers

1. What is the FSCG of the NSN 5330-00-700-6868?

   The FSCG of the NSN 5330-00-700-6868 is 5330

2. Does NSN 5330-00-700-6868 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5330-00-700-6868 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5330-00-700-6868 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5330-00-700-6868 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961