NATO Stock Number
5915-00-841-2786
Sold in multiples of
1 EA
DEMIL
DEMIL/MLI
Overall Length
10.750 inches
Overall Height
1.750 inches
Body Length
8.750 inches
Body Width
1.750 inches
Unthreaded Mounting Hole Diameter
Between 0.213 inches and 0.223 inches
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
10.250 inches
Vibration Resistance Range In Hertz
+10.0/+500.0
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
1.250 inches
Operating Tempurature Range
-55.0/+100.0 degrees celsius
Reference Frequency Per Function
16.0 megahertz blank
Input Impedance Per Function W/load
52.0 ohms blank
Output Impedance Per Function W/source Across Input
52.0 ohms blank
Input Terminal Manufacturer Code
80058
Input Terminal Identification
Ug-680/u
Output Terminal Manufacturer Code
80058
Output Terminal Identification
Ug-680/u
Voltage Standing Wave Ratio Per Function
1.4 blank
Inclosure Type
Encased
Mounting Facility Type And Quantity
4 unthreaded hole
Insertion Loss At Reference Frequency Per Function In Decibels
0.5 blank
Functional Terminal Type And Quantity
1 connector, receptacle input 1st function
Functional Terminal Type And Quantity
1 connector, receptacle output 2nd function
Maximum Dielectric Withstanding Ac Rms Voltage
250.0 volts at sea level
Specified Frequencies Of Discrimination Per Function
0.00 hertz blank and 32.00 megahertz blank and 50.00 megahertz blank and 10.00 gigahertz blank
Body Material
Metal
Frequency Band Width Per Function
0.00 hertz blank and 32.00 megahertz blank
Discrimination At Specificationified Frequencies Per Function In Decibels
1.0 blank and 1.0 blank and 100.0 blank and 100.0 blank
Voltage Standing Wave Ratio Frequency Limits Per Function
0.0 hertz blank and 30.0 megahertz blank
Style Designator
Rectangular terminal/terminals on opposite surfaces
Test Data Document
14933-d65006 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
