NSN D710

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

0.625 inches nominal inside diameter, round cross-sectional shape style, unable to decode hydrostatic test pressure, unable to decode burst test pressure, black exterior color.

NSN 4720-00-762-4332 Datasheet

(NSN) National Stock Number

4720-00-762-4332

(FSG) Federal Supply Group

47 - Pipe, Tubing, Hose, and Fittings

(FSC) Federal Supply Classification

4720 - Hose and Flexible Tubing

(NIIN) National Item Identification Number

00-762-4332

Requires Demilitarization

Yes

(INC) Item Name Code

22670

Date

Fri, Feb 27, 1970

Schedule B Code

4009210000

Burst Test Pressure

unable to decode

Cross-Sectional Shape Style

round

Exterior Color

black

Hydrostatic Test Pressure

unable to decode

Inside Diameter

0.625 inches nominal

Inside Surface Condition

smooth

Layer Composition And Location

1st layer braided steel wire and outer layer molded rubber, synthetic

Material

unable to decode

Maximum Operating Pressure

unable to decode

Media For Which Designed

unable to decode

Minimum Inside Bending Radius

8.000 inches

Nondefinitive Spec/Std Data

5/8 size

Outer Covering Environmental Protection

abrasion resistant and weatherproof

Outside Diameter

1.031 inches nominal

Temp Rating

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0022670

Cross Reference

CAGE Codes

81343

Society of Automotive Engineers Inc

U.s./canadian manufacturers

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

24161

Gates Corporation

U.s./canadian manufacturers

96606

American Coleman Company, The Dba Metro Crown International

Non-manufacturers

71741

Cmc of Georgia, Inc.

U.s./canadian manufacturers

98441

Parker Hannifin Corp Dba Pneutronics Div Stratoflex Products Division

U.s./canadian manufacturers

0XY83

Jw Winco Inc

Non-manufacturers

13174

Parker Hannifin Corp Hose Products Div

U.s./canadian manufacturers

19915

Diamond Tool and Horseshoe Co

U.s./canadian manufacturers

52737

I-T-E Imperial Corp Sub of Gould Inc Distribution and Controls Div

U.s./canadian manufacturers

55719

Idsc Holdings Llc Div Snap-on Industrial, A Div. Of Idsc Holdings , Llc

U.s./canadian manufacturers

56542

Mb Dynamics, Inc.

U.s./canadian manufacturers

65LN0

Apex Tool Group, Llc

U.s./canadian manufacturers

96508

Apex Tool Group

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

52350

Water Commodity

736 - Plumbing supplies

National Motor Freight Classification Item Number

051140

Schedule B & Trade

Schedule B

4009-21-0000

Description

tubes, pipes and hoses, of vulcanized rubber, exc hard rubber, reinforced/otherwise combined only with metal, without fittings

End Use

12750 - Industrial rubber products

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

62142

(NAICS) North American Industrial Classification System

326220

Questions & Answers

1. What is the FSCG of the NSN 4720-00-762-4332?

   The FSCG of the NSN 4720-00-762-4332 is 4720

2. Does the NSN 4720-00-762-4332 have a Schedule B code assigned?

   Yes, the Schedule B code is 4009210000

3. Does NSN 4720-00-762-4332 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 4720-00-762-4332 contain precious materials?

   Precious metal content is unknown

5. Does NSN 4720-00-762-4332 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 4720-00-762-4332 was assigned to the Federal Catalog?

   It was assigned 56 years ago, on Fri, Feb 27, 1970