NSN D8027

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

6.000 feet maximum height, one six ft telescoping mast assy,three mast stake subassy,one line retainer,three crimp,three tensioning block special features, telescopic construction, 5985-01-279-7942 antenna group end item identification, antennas,waveguides,and related equipment fsc application data.

NSN 5985-01-345-1210 Datasheet

(NSN) National Stock Number

5985-01-345-1210

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

01-345-1210

Requires Demilitarization

Yes

(INC) Item Name Code

00189

Date

Thu, Sep 12, 1991

Schedule B Code

8529109000

End Item Identification

5985-01-279-7942 antenna group

Construction

telescopic

Fsc Application Data

antennas,waveguides,and related equipment

Maximum Height

6.000 feet

Special Features

one six ft telescoping mast assy,three mast stake subassy,one line retainer,three crimp,three tensioning block

Supplementary Features

anchor lines to be gathered together and wrapped end to end on closed mast,lines to be secured in place with tape

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000189

Cross Reference

CAGE Codes

1L397

Gks Inc

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

05LP8

B & R Systemstec Inc Dba Rjr

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

67690

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

134180

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-01-345-1210?

   The FSCG of the NSN 5985-01-345-1210 is 5985

2. Does the NSN 5985-01-345-1210 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-01-345-1210 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5985-01-345-1210 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-01-345-1210 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-01-345-1210 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Thu, Sep 12, 1991