NSN DA0295

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

printed circuit board application design, stepped attenuation variation method, 1 electronic, voltage controlled adjustment device type and quantity, irregular body style, 0.5 and 1.0 and 2.0 and 4.0 and 8.0 and 16.0 and 32.0 attenuation per step in decibels.

NSN 5985-01-192-7794 Datasheet

(NSN) National Stock Number

5985-01-192-7794

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

01-192-7794

Requires Demilitarization

Yes

(INC) Item Name Code

00838

Date

Thu, Oct 25, 1984

Schedule B Code

8529109000

Adjustment Device Type And Quantity

1 electronic, voltage controlled

Application Design

printed circuit board

Attenuation Per Step In Decibels

0.5 and 1.0 and 2.0 and 4.0 and 8.0 and 16.0 and 32.0

Attenuation Variation Method

stepped

Body Style

irregular

End Item Identification

simulator,countermeasures signals,an/ulq-13

Frequency Range

30.000 megahertz minimum and 500.000 megahertz maximum

Impedance Rating In Ohms

50.0 input-output

Insertion Loss At Minimum Attenuation In Maximum Decibels

6.0

Overall Attenuation Accuracy In Decibels

-0.15 to 0.15

Overall Attenuation Range In Decibels

+0.5 to 63.5

Overall Height

0.400 inches nominal

Overall Length

2.000 inches maximum

Overall Width

1.000 inches maximum

Step Position Quantity

7

Terminal Type And Quantity

38 pin

Voltage Standing Wave Ratio

1.35

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000838

Cross Reference

CAGE Codes

28983

Daico Industries, Inc. Dba Daico Industries Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-01-192-7794?

   The FSCG of the NSN 5985-01-192-7794 is 5985

2. Does the NSN 5985-01-192-7794 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-01-192-7794 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5985-01-192-7794 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-01-192-7794 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-01-192-7794 was assigned to the Federal Catalog?

   It was assigned 41 years ago, on Thu, Oct 25, 1984