NSN DAA3243P003-341

An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see insulator, (as modified). Excludes:holder, (as modified); retainer, (as modified), and spacer, plate.

b-2 aircraft end item identification, feat criticality code justification, engine assembly part name assigned by controlling agency, aircraft mounting type, jet fuel fuel type.

NSN 2835-01-444-3628 Datasheet

(NSN) National Stock Number

2835-01-444-3628

(FSG) Federal Supply Group

28 - Engines, Turbines, and Components

(FSC) Federal Supply Classification

2835 - Components, Aircraft Non-Prime Mover and Gas Turbines and Jet Engines; Non-Aircraft Prime Mover

(NIIN) National Item Identification Number

01-444-3628

Requires Demilitarization

Yes

(INC) Item Name Code

50489

Date

Mon, May 5, 1997

Schedule B Code

8411818000

End Item Identification

b-2 aircraft

Criticality Code Justification

feat

Fuel Type

jet fuel

Part Name Assigned By Controlling Agency

engine assembly

Mounting Type

aircraft

Nondefinitive Spec/Std Data

ii type

Overall Height

17.700 inches minimum and 18.700 inches maximum

Overall Length

45.460 inches minimum and 46.460 inches maximum

Overall Width

25.500 inches minimum and 26.500 inches maximum

Power Output For Which Designed

pneumatic

Reference Data And Literature

af to. 1b-2a-4-49

Special Features

current type:dc; furnished items:gearbox assembly, permanent magnetic generator, oil pump assembly, fuel control, pneumatic turbine starter; inclosure:not included; air flow rate:302.1 lbs per minute; discharge pressure rating:65.77 psi; volts in voltage:22.0 lowest 29.0 highest; nuclear hardness critical item

Specification/Standard Data

81349-mil-p-8686 government specification

Test Data Document

"1w025-daa3243+003g specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0050489

Cross Reference

CAGE Codes

99193

Honeywell International Inc. Dba Honeywell International Div Aerospace - Phoenix

U.s./canadian manufacturers

1W025

Northrop Grumman Systems Corp Dba Northrop Grumman Computing Systems

U.s./canadian manufacturers

Freight Information

Air Commodity

AD -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

J - 100.0

National Motor Freight Class Rating

J - 100.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

1 - Aircraft engine, internal combustion engines and fuel control devices

Uniform Freight Classification Item Number

61410

Water Commodity

675 - Aircraft engine, boxed

National Motor Freight Classification Item Number

120800

Schedule B & Trade

Schedule B

8411-81-8000

Description

gas turbine engine, except aircraft nesoi, of a power not exceeding 5,000 kw

End Use

21100 - Industrial engines

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

71489

(NAICS) North American Industrial Classification System

333611

Questions & Answers

1. What is the FSCG of the NSN 2835-01-444-3628?

   The FSCG of the NSN 2835-01-444-3628 is 2835

2. Does the NSN 2835-01-444-3628 have a Schedule B code assigned?

   Yes, the Schedule B code is 8411818000

3. Does NSN 2835-01-444-3628 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 2835-01-444-3628 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 2835-01-444-3628 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 2835-01-444-3628 was assigned to the Federal Catalog?

   It was assigned 29 years ago, on Mon, May 5, 1997