NSN DD2009

A cylindrical item with or without flange(s), designed to be inserted in a pump casing or secured to the impeller of a centrifugal pump. It is used for the purpose of providing a close running clearance between the impeller and casing in order to prevent or overcome leakage due to erosion. It may also be used as a diffuser ring in the suction and discharge throats of valves.

amalgam separator part name assigned by controlling agency, 4.800 inches nominal overall length, plastic material, 4.800 inches nominal overall width, 8.400 inches nominal overall height.

NSN 6520-01-601-1256 Datasheet

(NSN) National Stock Number

6520-01-601-1256

(FSG) Federal Supply Group

65 - Medical, Dental, and Veterinary Equipment and Supplies

(FSC) Federal Supply Classification

6520 - Supplies, Equipment and Dental Instruments

(NIIN) National Item Identification Number

01-601-1256

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Fri, Jan 6, 2012

Material

plastic

Overall Height

8.400 inches nominal

Overall Length

4.800 inches nominal

Overall Width

4.800 inches nominal

Part Name Assigned By Controlling Agency

amalgam separator

Special Features

amalgam separator; separates mercury from waste water during dental procedures; two 0.625 in npt ports: inlet port connected to high volume evacuation tip, and outlet port connected to vacuum source; abs plastic housing; 0.5 micron water filter; dental vacuum system operating requirements: 21 to 27 kpa (6 to 8 in hg) with a minimum vacuum of 21 kpa (6 in hg) maintained at the farthest hve outlet, flow rate of 3.3 liters/sec (7 standard cubic feet per minute).

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1956985

Cross Reference

CAGE Codes

64616

Defense Medical Standardization Board

U.s./canadian manufacturers

56SR9

Duel Incorporated

Non-manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

63220

Water Commodity

594 - Pumps and parts, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

125820

Questions & Answers

1. What is the FSCG of the NSN 6520-01-601-1256?

   The FSCG of the NSN 6520-01-601-1256 is 6520

2. Does NSN 6520-01-601-1256 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6520-01-601-1256 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6520-01-601-1256 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6520-01-601-1256 was assigned to the Federal Catalog?

   It was assigned 14 years ago, on Fri, Jan 6, 2012