NSN DD76

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.681 inches nominal cartridge overall length, 36.000 milliamperes nominal current rating for which designed, 0.335 inches nominal cartridge overall diameter, short cylindrical cartridge style, cartridge two pin polarized base style.

NSN 6240-01-052-5745 Datasheet

(NSN) National Stock Number

6240-01-052-5745

(FSG) Federal Supply Group

62 - Lighting Fixtures and Lamps

(FSC) Federal Supply Classification

6240 - Electric Lamps

(NIIN) National Item Identification Number

01-052-5745

Requires Demilitarization

Yes

(INC) Item Name Code

24416

Date

Fri, Dec 16, 1977

Schedule B Code

9405400000

Base Style

cartridge two pin polarized

Cartridge Overall Diameter

0.335 inches nominal

Cartridge Overall Length

0.681 inches nominal

Cartridge Style

short cylindrical

Current Rating For Which Designed

36.000 milliamperes nominal

Lens Color

green

Lens Light Transmission Characteristic

transparent

Light Output Rating

unable to decode

Material

unable to decode

Primary Lamp Type

incandescent

Rated Average Life

not rated

Voltage Rating

24.000 volts nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0024416

Cross Reference

CAGE Codes

15513

Display Products Inc. Dba Data Display Products

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

55690

Water Commodity

761 - Electric lamps

National Motor Freight Classification Item Number

109700

Questions & Answers

1. What is the FSCG of the NSN 6240-01-052-5745?

   The FSCG of the NSN 6240-01-052-5745 is 6240

2. Does the NSN 6240-01-052-5745 have a Schedule B code assigned?

   Yes, the Schedule B code is 9405400000

3. Does NSN 6240-01-052-5745 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6240-01-052-5745 contain precious materials?

   Precious metal content is unknown

5. Does NSN 6240-01-052-5745 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6240-01-052-5745 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Fri, Dec 16, 1977