NSN DH5656

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.440 inches maximum body length, hermetically sealed and burn in and monolithic and positive outputs features provided, 1 comparator design function and quantity, 0.065 inches nominal body height, 0.275 inches nominal body width.

NSN 5962-01-271-5531 Datasheet

(NSN) National Stock Number

5962-01-271-5531

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5962 - Electronic Microcircuits

(NIIN) National Item Identification Number

01-271-5531

Requires Demilitarization

Yes

(INC) Item Name Code

31779

Date

Wed, Jan 27, 1988

Schedule B Code

8542900000

Body Height

0.065 inches nominal

Body Length

0.440 inches maximum

Body Width

0.275 inches nominal

Design Function And Quantity

1 comparator

Features Provided

hermetically sealed and burn in and monolithic and positive outputs

Inclosure Configuration

flat pack

Inclosure Material

ceramic

Input Circuit Pattern

13 input

Operating Temp Range

-55.0 to 125.0 celsius

Output Logic Form

transistor-transistor logic

Storage Temp Range

-65.0 to 150.0 celsius

Terminal Surface Treatment

solder

Terminal Type And Quantity

16 flat leads

Test Data Document

"88818-a574a207 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Voltage Rating And Type Per Characteristic

-0.5 volts minimum power source and 7.0 volts maximum power source

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0031779

Cross Reference

CAGE Codes

88818

Kearfott Corporation Div Guidance and Navigation Division

U.s./canadian manufacturers

34335

Advanced Micro Devices Inc Dba Amd Austin

U.s./canadian manufacturers

07263

Fairchild Semiconductor Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

34580

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

8542-90-0000

Description

electronic integrated circuits and microassembly parts

End Use

21320 - Semiconductors

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77689

(NAICS) North American Industrial Classification System

334413

Questions & Answers

1. What is the FSCG of the NSN 5962-01-271-5531?

   The FSCG of the NSN 5962-01-271-5531 is 5962

2. Does the NSN 5962-01-271-5531 have a Schedule B code assigned?

   Yes, the Schedule B code is 8542900000

3. Does NSN 5962-01-271-5531 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5962-01-271-5531 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5962-01-271-5531 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5962-01-271-5531 was assigned to the Federal Catalog?

   It was assigned 38 years ago, on Wed, Jan 27, 1988