NSN DIT-A80

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

deactuation point adjustable and actuation point adjustable contact adjustability, decrease contact action stimulus, elect eqp grp end item identification, 2.187 inches nominal body length, +0.50 to 77.20 actuation point pounds per square inch and +3.30 to 80.00 deactuation point pounds per square inch contact adjustment range.

NSN 5930-01-144-5154 Datasheet

(NSN) National Stock Number

5930-01-144-5154

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-144-5154

Requires Demilitarization

Yes

(INC) Item Name Code

00206

Date

Tue, Dec 21, 1982

Schedule B Code

8536509065

End Item Identification

elect eqp grp

Body Length

2.187 inches nominal

Contact Action Stimulus

decrease

Contact Adjustability

deactuation point adjustable and actuation point adjustable

Contact Adjustment Range

+0.50 to 77.20 actuation point pounds per square inch and +3.30 to 80.00 deactuation point pounds per square inch

Contact Adjustment Type

external deactuation point screw and external actuation point screw

Contact Load Current Rating

unable to decode

Contact Voltage Rating In Volts

unable to decode

Distance Between Mounting Facility Centers

2.250 inches nominal

Features Provided

hermetically sealed case

Hazardous Locations/Environmental Protection

weatherproof

Inside Diameter

unable to decode

Media For Which Designed

gas or liquid

Mounting Facility Pattern

two position in-line

Mounting Method

bracket(s) and unthreaded hole(s)

Nominal Thread Size

unable to decode

Nonpile-Up Contact Arrangement

1 pole, double throw, one position momentary

Overall Height

4.562 inches nominal

Overall Length

4.343 inches nominal

Overall Width

3.500 inches nominal

Pressure Connector Type

unable to decode

Pressure Switch Type

gage

Proof Pressure

160.00 pounds per square inch

Style Designator

rectangular w/bracket

Terminal Type

screw

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Unthreaded Mounting Hole Diameter

0.203 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000206

Cross Reference

CAGE Codes

89326

Barksdale, Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-144-5154?

   The FSCG of the NSN 5930-01-144-5154 is 5930

2. Does the NSN 5930-01-144-5154 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-01-144-5154 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-144-5154 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-144-5154 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-144-5154 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Tue, Dec 21, 1982