NSN DIT276

An item fabricated from nonmetallic special shaped section. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items, except for molded corners, slot(s), press fit buttons, and the like must be of one continuous cross section. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes:bushing, nonmetallic; packing, performed; pad, cushioning;and seal, plain. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see nonmetallic special shaped section.

impedance rating in ohms, 0.302 inches minimum and 0.322 inches maximum body outside diameter, unable to decode maximum transformer power rating, 0.365 inches minimum and 0.385 inches maximum body length, hermetically sealed inclosure type.

NSN 5950-00-930-5320 Datasheet

(NSN) National Stock Number

5950-00-930-5320

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-930-5320

Requires Demilitarization

Yes

(INC) Item Name Code

00780

Date

Fri, Jun 3, 1966

Schedule B Code

8548900100

Body Length

0.365 inches minimum and 0.385 inches maximum

Body Outside Diameter

0.302 inches minimum and 0.322 inches maximum

Impedance Rating In Ohms

Inclosure Type

hermetically sealed

Maximum Transformer Power Rating

unable to decode

Mounting Method

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

6 wire lead

Winding Function And Quantity

Winding Operating Current

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000780

Cross Reference

CAGE Codes

14028

Sypris Electronics, Llc

U.s./canadian manufacturers

15634

Magnetika Inc

U.s./canadian manufacturers

80223

United Transformer Corp Sub of Opt Industries Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-930-5320?

   The FSCG of the NSN 5950-00-930-5320 is 5950

2. Does the NSN 5950-00-930-5320 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5950-00-930-5320 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-00-930-5320 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-00-930-5320 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-00-930-5320 was assigned to the Federal Catalog?

   It was assigned 60 years ago, on Fri, Jun 3, 1966