NSN DIXICHLOR MAX

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

sodium hazardous substances, epa registration no. 813-15; supplementary features, active ingredient: sodium hypochlorite: 12.5 - 15.6 weight-%; sodium chloride: 9 - 10 weight-%; sodium hydroxide: 0.5 - 2 weight-%; other ingredients: 72.4 - 78 weight-%; physical form: liquid; dixichlor max is a mixture of bleach, sodium hydroxide and sodium hypochlorite 12.5%. its intended use is forswimming pool chlorinator, hard surface cleaner, water treatment chemical and biocides. this is a pesticide product, do not use in a pesticide application that is not included on the label. physical and chemical properties - appearance: clear, pale yellow, or greenish liquid; odor: pungent, chlorine odor; odor threshold: 0.9 mg/m3; ph: 12 - 13; melting point / freezing point: -3 deg. f. (-19.4 deg. c.) initial boiling point and boiling range: decoposes above 230 deg. f. (110 deg. c.); flash point: nonflammable; vapor pressure: (mmhg at 20 deg. c.): 17.5; specific gravity: 1.20 - 1.40; solubility in water: complete; quantity within each unit package: bulk (tanker) quantity special features, dixichlor max sodium hypochlorite solution part name assigned by controlling agency.

NSN 6810-01-691-7074 Datasheet

(NSN) National Stock Number

6810-01-691-7074

(FSG) Federal Supply Group

68 - Chemicals and Chemical Products

(FSC) Federal Supply Classification

6810 - Chemicals

(NIIN) National Item Identification Number

01-691-7074

Requires Demilitarization

Yes

(INC) Item Name Code

37945

Date

Fri, Oct 23, 2020

Hazardous Substances

sodium

Part Name Assigned By Controlling Agency

dixichlor max sodium hypochlorite solution

Special Features

active ingredient: sodium hypochlorite: 12.5 - 15.6 weight-%; sodium chloride: 9 - 10 weight-%; sodium hydroxide: 0.5 - 2 weight-%; other ingredients: 72.4 - 78 weight-%; physical form: liquid; dixichlor max is a mixture of bleach, sodium hydroxide and sodium hypochlorite 12.5%. its intended use is forswimming pool chlorinator, hard surface cleaner, water treatment chemical and biocides. this is a pesticide product, do not use in a pesticide application that is not included on the label. physical and chemical properties - appearance: clear, pale yellow, or greenish liquid; odor: pungent, chlorine odor; odor threshold: 0.9 mg/m3; ph: 12 - 13; melting point / freezing point: -3 deg. f. (-19.4 deg. c.) initial boiling point and boiling range: decoposes above 230 deg. f. (110 deg. c.); flash point: nonflammable; vapor pressure: (mmhg at 20 deg. c.): 17.5; specific gravity: 1.20 - 1.40; solubility in water: complete; quantity within each unit package: bulk (tanker) quantity

Supplementary Features

epa registration no. 813-15;

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

D - Indicates there is no information in the hmirs; however, the nsn is in a fsc in table i of federal standard 313 and a msds should be available to the user.

Pseudo Item Name Code

0037945

Cross Reference

CAGE Codes

0NZG2

Dpc Industries Inc

Non-manufacturers

Freight Information

Air Commodity

CZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

23310

Water Commodity

635 - Chemicals, other than drugs or sundries

National Motor Freight Classification Item Number

043940

Questions & Answers

1. What is the FSCG of the NSN 6810-01-691-7074?

   The FSCG of the NSN 6810-01-691-7074 is 6810

2. Does NSN 6810-01-691-7074 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6810-01-691-7074 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6810-01-691-7074 contain hazardous materials?

   Indicates there is no information in the hmirs; however, the nsn is in a fsc in table i of federal standard 313 and a msds should be available to the user.

5. When the NSN 6810-01-691-7074 was assigned to the Federal Catalog?

   It was assigned 5 years ago, on Fri, Oct 23, 2020