NSN DLF-875

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decode mounting method, unable to decode frequency rating, unable to decode input-output phase relationship, unable to decode mounting facility quantity, fully inclosed inclosure type.

NSN 5950-01-289-4510 Datasheet

(NSN) National Stock Number

5950-01-289-4510

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-289-4510

Requires Demilitarization

Yes

(INC) Item Name Code

32496

Date

Wed, Nov 23, 1988

Frequency Rating

unable to decode

Inclosure Type

fully inclosed

Input-Output Phase Relationship

unable to decode

Mounting Facility Quantity

unable to decode

Mounting Method

unable to decode

Nominal Thread Size

unable to decode

Overall Diameter

0.956 inches nominal

Overall Length

0.625 inches nominal

Reliability Indicator

not established

Terminal Type And Quantity

4 pin

Thread Series Designator

unable to decode

Winding Function And Quantity

Winding Operating Current

unable to decode

Winding Operating Voltage

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032496

Cross Reference

CAGE Codes

15634

Magnetika Inc

U.s./canadian manufacturers

11293

Gte Government Systems Corp Strategic Systems Div

U.s./canadian manufacturers

53342

Opt Industries Inc Div of Electronika Inc

U.s./canadian manufacturers

80223

United Transformer Corp Sub of Opt Industries Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-01-289-4510?

   The FSCG of the NSN 5950-01-289-4510 is 5950

2. Does NSN 5950-01-289-4510 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5950-01-289-4510 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5950-01-289-4510 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5950-01-289-4510 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Wed, Nov 23, 1988