NSN DOD-T033

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

joint level 3 k wire steinmann pin instrument set part name assigned by controlling agency, joint instrument tray designed for the services' forward surgical teams; consists of the following core instruments: 6515003109120, 6515003235380, 6515010601641, 6515011669028, 6530007778600, 6530014212968, 6530014287085 and 6530015729716 special features.

NSN 6545-01-616-8776 Datasheet

(NSN) National Stock Number

6545-01-616-8776

(FSG) Federal Supply Group

65 - Medical, Dental, and Veterinary Equipment and Supplies

(FSC) Federal Supply Classification

6545 - Outfits, Kits and Replenishable Field Medical Sets

(NIIN) National Item Identification Number

01-616-8776

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Fri, Mar 1, 2013

Part Name Assigned By Controlling Agency

joint level 3 k wire steinmann pin instrument set

Special Features

joint instrument tray designed for the services' forward surgical teams; consists of the following core instruments: 6515003109120, 6515003235380, 6515010601641, 6515011669028, 6530007778600, 6530014212968, 6530014287085 and 6530015729716

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1921656

Cross Reference

CAGE Codes

64616

Defense Medical Standardization Board

U.s./canadian manufacturers

Freight Information

Air Commodity

MZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

92305

Water Commodity

534 - Medical supplies (room temperature) (not requiring temperature control)

National Motor Freight Classification Item Number

187645

Questions & Answers

1. What is the FSCG of the NSN 6545-01-616-8776?

   The FSCG of the NSN 6545-01-616-8776 is 6545

2. Does NSN 6545-01-616-8776 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6545-01-616-8776 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6545-01-616-8776 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6545-01-616-8776 was assigned to the Federal Catalog?

   It was assigned 13 years ago, on Fri, Mar 1, 2013